i know it's hard to tell but what can you guys see that is not standard about this engine and can anyone identify it eg what size ect
YOU HAVE JUST BEEN DAKED
don't worry it's a VW thing
well its a type3 block i can tell u that
-Joel
Post the engine number. It's stamed on the block at the base of the generator support.
Those valve covers. Has the cylinder tin been hacked? On a type 1 there should be a rectangular section that you run two screws through to fasten it to the head.
Certainly looks like it. 009 type dissy
Has it got a single or double hole where the inlet manifold bolts to the head?
the engine number will be behind the fuel pump near the case seam as its a type 3 block and will probably start with a T
thats why its blank under the genny stand and the original oil filler/dipstick hole is blocked off with a plate
also notice the lack of a welsh plug in the oil gallery below the dizzy and the bug style dipstick has been drilled in on a funny angle all signs of a type 3 block
i'm assume it was from a baja or buggy by the side sealing tin being cut off?
-Joel
