wanted stud adapter to change from 4stud vw to holden or ford 5 stud
cant find any decent mags to fit 4 stud beetle
can email me at
stilgar@aapt.net.au or u2u me
Sharon
your not looking hard enough then.
What size are you looking for??
Is this for your Poraga???
How "wide" are your guards???
You need to "fill" the guards to make it look good
Futue te ipsum!!!
Hi Bizzare yeah its for my poraga i want real shiney wheels
the ones that are on their now are front 15 x 6 tyres 205/60 r15
back 15 x 8 tyres 225/60r15
and they fit easily i can prob go up a size or 2 in tyres and i really want 16/17inch rims
i have had bob jane do the ring around and they couldn,t find anything at all
For my 2c i would change to Porsche
Get new rotors and drums
V Force has a set of Ceyene 18's 2nd hand at the moment. A tad scratched but nothing really worh the worry.
they would fill the guards no worries.
Otherwise if you want bling - go the Ford / holden route.
Just trail fit / test / measure
get the offset right so you dont have spacers.
get the outside of the wheel almost flush with the guard
Futue te ipsum!!!
Use EA-EF Ford wheels on redrilled hubs. They have an offset of 6P. Fills wide guards REAL well
Pay your debts, CxxT
Ta for the tip VWCOOL I will look into that but i still need a adapter to make them 5 stud dont I??
does anyone know where I can buy a 5 stud adapter kit
[ Edited on 4-10-2006 by fenrayer ]
Hey Sharon,
You dont need an adapter babe. I bought blank hubs and redrilled them to the commodore 5 stud pattern. These were purchased from V-Force. I drilled them myself, but you really have to get the measurements right before drilling them! I did this while also doing my disc brake conversion which is using the the EA falcon setup. It would be easier for you to look into the blank hubs, then get the right offset for the wheels...
Ash x
1963 Single Cab Ute: "El Concreto"
1962 Baja Beetle: "Peanut"
1968 Porsche 912 SWB: "Pip"
1972 Kombi Snail: "The Snail"
2012 Skoda Octavia Scout: "Scout"
2016 Scirocco R: "Rocco"
thanks for that Ash
checked out vforce last nite looks like thats the way to go
at least that way i can have any mags i want LOL
what are you going to do with the old mags ? i am looking for some .
i started with nothing and have most of it left !
okay if you are talking about these mags then yes they will be for sale when i get some new ones hope fully before nov 17th
but
the white ones that were origionally on my poraga have been annexed by my husband for his buggy / baja when he gets one
I have some Hotwire mags from mine that i dont need anymore either
Ash x
1963 Single Cab Ute: "El Concreto"
1962 Baja Beetle: "Peanut"
1968 Porsche 912 SWB: "Pip"
1972 Kombi Snail: "The Snail"
2012 Skoda Octavia Scout: "Scout"
2016 Scirocco R: "Rocco"
post us a pic ash of ya hotwires
u2u to both of you ladies
i started with nothing and have most of it left !
Or you could re-drill for 100PCDx4 and run just about any wheel thats out there!... Thats a very common PCD for the 'fast four' crowd, which means the wheel choice is huge and the ET is perfect for dubs.... I have 17x7.5's under my Squareback and they fit a treat.... But then again if you went with 100PCDx5 you have all the late model 'Ricer' rims to choose from too.... And the widths just go up and up from there.... And that may be a better choice for fibreglass guards.... Pick the rims you want, make sure the off-set (ET) will work without adapters (very illegal to run them) and get your brakes modded to suit....
