Skip to content
Aussieveedubbers

german door seals too mutch rubber

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

sgetty Fahrvergnugen

994 posts · joined Sep 2003 ·

#550798
the german door seals we bought seem to be too thick
the door wont close poperly as it seems too thick
is this normal?
its a 64 bug too lol forgot to mention
deon
🙂

aussiebaja Insano Dub Head

738 posts · joined Jun 2006 ·

#550808
you can allways give em to me and you can buy another set ,,,,,,,,,,,,,,,,,,,,,lol😂😂
BETTER TO BE THOUGHT A FOOL THAN TO OPEN YOUR MOUTH AND REMOVE ALL DOUBT:puke

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#550809
make sure you have removed all the old glue n gunk from the groove

then once tehre clean and open make sure you seat the seal right to the bottom of the door lip this takes time and effort to get them into place not easy
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

sgetty Fahrvergnugen

994 posts · joined Sep 2003 ·

#551134
oh yes i see what you mean

is that bit sorta spose to hang out the door a bit near the lock?

deon
🙂

sgetty Fahrvergnugen

994 posts · joined Sep 2003 ·

#551135
stacy b wrote:you can allways give em to me and you can buy another set ,,,,,,,,,,,,,,,,,,,,,lol😂😂
i do have a set of cal look window rubbers for sale, brand new got sent the wrong ones and havnt been stuffed returning.
🙂

Yogie Moderator Custom Title Time!

1,608 posts · joined Jun 2003 ·

#551157
sgetty wrote:oh yes i see what you mean

is that bit sorta spose to hang out the door a bit near the lock?

deon
Yes

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#551183
the rubber near the door isn't supposed to hang out...
the rubber really needs to be glued there....
or at least pushed into place...
and the door shut...

although I don't think I've glued Mine anywhere...

I didn't think that My doors would ever close properly,,
but it only took a little while and they were OK...
the rubbers that is....

just imagine door rubbers being fitted every few minutes at the factory.... How did they do it???

Lee

http://community.webshots.com/user/vw68autobug
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#551198
You DONT need glue just a lot of effort to clean n push the seal right home
thats why the door has the lip on it to hold the rubber seal in place👍👍👍
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

aussiebaja Insano Dub Head

738 posts · joined Jun 2006 ·

#551209
yeah deon how much do you want for them
BETTER TO BE THOUGHT A FOOL THAN TO OPEN YOUR MOUTH AND REMOVE ALL DOUBT:puke

sgetty Fahrvergnugen

994 posts · joined Sep 2003 ·

#551577
jason ill have a look what i paid for them and come up with a super price for ya!

right i got one side in the passanger side nice and snug by giving it a good clean)thanks again)

but the drivers side slips in and out on one side too easy:o
whats going on?

deon
🙂

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#551770
Get a rubber mallet or a bit of heavy rag and cover the area that loose and give it a gentel tap to close the gap a little

Is the door fitted properly in the first place do you have good and even door gaps all the way around

Are the door faces level top and bottom with the rear panel etc etc and is the front of the door sitting in the correct spot

lots of things to look at before the door seal is fitted
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

sgetty Fahrvergnugen

994 posts · joined Sep 2003 ·

#551877
thanks got oneto fit beatifully
but the other side sliped srtaight in and falls straight out when you open the door
so im sending them back
plus the window seals jason sorry but all up the parts i need to send back ad up to 500 bucks
nothing but probs with this dude sending wrong stuff, not your mate vw54 got some stuff of them and they are good

deon
🙂

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#551884
You need to adjust the door gap it wont fall out then
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

sgetty Fahrvergnugen

994 posts · joined Sep 2003 ·

#551966
no it wasnt the gap it was the seal, i had a bit of old seal and it fitted perfect the seals different.
deon
🙂

sgetty Fahrvergnugen

994 posts · joined Sep 2003 ·

#552912
got new seals today and after putting them on the wrong side lol fitted them properly and they fit great just a little adjustment on the doors to get the gap right and then should be sweet thanks for the replys dudas
deon
🙂