Skip to content
Aussieveedubbers

wtd- white walls

0 likes
Share Share on Facebook Share on X Share on Reddit

sub60 Seriously Crusin Dubber

137 posts · joined May 2005 ·

#558180
Is it true you can buy a white wall section to place on existing tyres, if so what sizes and where from? Thanks

Schmoburger Baywindow Mafia Godfather and Cement-Shoe Fitter

2,185 posts · joined Oct 2005 ·

#558228
You can get walls inlaid into standard tyres, however I have heard of them damaging the sidewalls and increasing the risk of tyre failure... particularly on Kombis and other vehicles with a high center of gravity.

You can get plastic or rubber flappers which are inserted between the rim and inner edge of the tyre which might be better.

there is whitewall paint too, but apparently it needs touching up fairly regularly to stay looking good.

then there are tyres made from the factory as whitewalls but I think they are generally like the old crossply's and dont drive as well as modern tyres, and again there may be load issues with heavy high cars like Kombis.

Cheers!
1976 Kombi Trakka camper, "Buttercup"... driver.
1976 Beluxe Microbus, "Saphir"... resto.
1974 Kombi panelvan, "George"... shed.
1974 Superbug, "Schmeetle"... resto.
[img]http://i23.photobucket.com/albums/b366/c

boristherat Wolfsburg Wizard

563 posts · joined Mar 2006 ·

#558247
Yeah, whitewalls can be added to existing tyres. Make sure your guy is experienced and does not groove to much of sidewall out. We had ours done by a great guy here in Adelaide who has been doing it for 20 yrs or so. We have run for 20,000 kms on these with no effect whatsoever. Boris has 'flappers'(whitewall inserts) and these have been good to and are easier to keep clean. I have heard of people with flappers though having them shred on a long journey as they are not designed to spin for long periods at 100kmh+.
Real whitewall tyres can be had these days in modern tread patterns and handling characteristics but cost mega $$$$$.
Plusses and minusses all round really. Good luck with the decision making, either way, they look good and can give your ride a real lift.


1959 Mercedes Benz 190
1963 Chevrolet Corvair
1969 BMW 2002 Auto
1973 Mercedes Benz 230.6

pyr0 flame-on

4,457 posts · joined Mar 2003 ·

#558249
watch out with the flappers and your tyre pressure too, as they will wear the wall of your tyre down really bad if you pressure is a little too low
Founding member of the C'town Rat-Pack

seagull Compulsive Aussie Vee Dubber

4,979 posts · joined Dec 2003 ·

#558382
what the hell are you doing mike ???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
Looking for that special lady : PM me for coffee & cake

greedy53 Bishop of Volkswagenism

3,062 posts · joined Mar 2006 ·

#558406
classic post out flappers last time i got some it was $110.00 delivered see the add this site
👍👍😂🙅🥷😬🤓

sub60 Seriously Crusin Dubber

137 posts · joined May 2005 ·

#558684
THANKS VERY MUCH EVERYBODY YOUR INFO IS APPRECIATED. WHATS WRONG NEIL AS LONG AS I USE STRONG GLUE, THEY SHOULDN'T FLING OFF AND KILL ANYONE?

greedy53 Bishop of Volkswagenism

3,062 posts · joined Mar 2006 ·

#558701
glue what glue they are held on by placing theedge under the wheel lip
👍👍😂🙅🥷😬🤓

sub60 Seriously Crusin Dubber

137 posts · joined May 2005 ·

#558712
Only playing, Cheers