Hi can anybody tell me where that smaller connector in the middle goes?
rocknrob Insano Dub Head
844 posts · joined Dec 2003 ·
subaru wiring
mackaymanx Custom Title Time!
1,611 posts · joined Jan 2006 ·
aircon?
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]
rocknrob Insano Dub Head
844 posts · joined Dec 2003 ·
nahhh checked all the aircon connections...thanks anyway...anybody else?
gull Wolfsburg Wizard
446 posts · joined Jun 2005 ·
The loom in your hand is a 3 pug unit , so the motor loom must be a 3 plug as well .Have you removed the air con form this motor ? is the motor & loom from the same car / cut ?
did it have ABS ??? EBT ??
did it have ABS ??? EBT ??
gull Wolfsburg Wizard
446 posts · joined Jun 2005 ·
It looks like the earthing ( kit ) wires to me
top shot of motor ?
top shot of motor ?
rocknrob Insano Dub Head
844 posts · joined Dec 2003 ·
Yeah you may be right...trying to figure the wiring diagram....this is what you get when you leave a project for a couple of months(and travel to central australia)gull wrote:It looks like the earthing ( kit ) wires to me
top shot of motor ?
Yes i had the whole car to start with a i took some pics but not enough:cry
lexm Commited Dubber
57 posts · joined Apr 2004 ·
U2U sent
Brad Wolfsburg Elder
3,764 posts · joined Aug 2002 ·
If you pulled it out then it should plug in no issues at all.
The plug you have empty usually goes into the engine loom along with the other two.
In short there should be another plug floating around which has not yet been joined.
The plug you have empty usually goes into the engine loom along with the other two.
In short there should be another plug floating around which has not yet been joined.
rocknrob Insano Dub Head
844 posts · joined Dec 2003 ·
Hi All, I still can't figure this connection...does anybody within a couple of hours drive of the gold coast have a similar engine i can have a look at? I must have lost a connector somehow. 😬
Brad Wolfsburg Elder
3,764 posts · joined Aug 2002 ·
Hi,
Funnily enough I do ....
If you want to drop up to the Shop in Stafford I have a 3 Plug EJ 22 in a Brumby and also have at least 1 sitting on the shelf. If you bring your ECU I can show you what goes where.
28 Hayward St, STAFFORD
Funnily enough I do ....
If you want to drop up to the Shop in Stafford I have a 3 Plug EJ 22 in a Brumby and also have at least 1 sitting on the shelf. If you bring your ECU I can show you what goes where.
28 Hayward St, STAFFORD
rocknrob Insano Dub Head
844 posts · joined Dec 2003 ·
You are a godsend..see you soon:kiss