Name : Brad
Location : Brisbane
Items : Lots of them ... Due to a change in plans I am considering parting my EJ 20 T powered Baja Bug. Now this may not occur but if I get enough interest it will.
Rough list of big ticket items :
IRS / Ball Joint Pan
4” Lift Kit
Widened rear arms
Twin Bilstein shocks on rear, single coil overs on front
4 Wheel disc brakes
Subaru EJ 20 T engine with M4 Motec
Custom 091 Transmission, freshly rebuilt, Albins Super Diff and custom 3rd and 4th
15 x 7 and 15 x 8 Custom Mags, 235 x 75 x 15 BFG Mudders on front, 33 x 12.5 x 15 on rear
Auto Meter Tacho, oil pressure, Water Temp and Boost Gauge
Custom Alloy Fuel Tank – 60L
Custom Alloy Radiator
Setup with Air Con, needs regas
4 point internal roll cage
Recaro Seats
Custom Trim
IPF Spoties
Stage 2 Kennedy Clutch
930 Porsche CV’s
Momo Steering Wheel
Alpine Stereo with sub woofer, 6x 9’s, splite and tweeters.
Full Complianced and Road Registered.
Heaps of custom mods.
If you are interested in anything then let me know.
I also have two 99% rust free bodies for sale. Would preffer to sell the Baja as a roller with compliance plate and numbers so if you are thinking of building one could be a cheap starting point once I pull all the fancy stuff off it.
Widened rear arms
Twin Bilstein shocks on rear
Subaru EJ 20 T engine with M4 Motec
Custom 091 Transmission, freshly rebuilt, Albins Super Diff and custom 3rd and 4th
15 x 7 and 15 x 8 Custom Mags, 235 x 75 x 15 BFG Mudders on front, 33 x 12.5 x 15 on rear
Auto Meter Tacho, oil pressure, Water Temp and Boost Gauge
Custom Alloy Fuel Tank – 60L
Custom Alloy Radiator
Recaro Seats
IPF Spoties
Stage 2 Kennedy Clutch
930 Porsche CV’s
Alpine Stereo with sub woofer, 6x 9’s, splite and tweeters.
in my buggy at ya shop could you email me a re-configured qoute
ps sorry i couldnt catch up with you on the w/e i spent most of the time in sessney and only stopped in bris briefly to see my parents
Bill you have mail.
Steve give me a call
VWKid - Recaro Seats and runners with matching door trims, rear cards, roof ling and carpets, worn but still looking cool $650 . these seats would need to be mounted as they are not a bolt in to a VW. I have custom brackets welded in.
Rear discs, will they fit a type 3? If so, very interested. And mags, any pics, interested in those potentially too (as second in line, of course). Discs and Mags: are they standard 4 stud?
Thanks,
Mick.
[ Edited on 14-3-2007 by sinecure ]
[ Edited on 14-3-2007 by sinecure ]
[ Edited on 14-3-2007 by sinecure ]
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
Discs will fit a type 3 , mags should fit and they are standard VW 4 stud. Pics .. check out the manx club gallery under Brad Back Yard Bash - www.manxclub.org
