Hydraulic handbrake - allowed for rego?

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 · 17 May 2007, 9:29 pm

#591999

Hello

Just putting a question out at this stage (haven't decided either way).....I intend to run type III rear drums on my 54 pan. Normally no major dramas but with the 54 the cables go through the tunnel all the way to the front (between the front beam 'beams').

Because the type III backing plates have the cables enter from the wrong side compared to the original backing plates, rather than messing around with cables etc etc, I though a hydraulic handbrake would be a good alternative.

Anyone know whether these are allowed under regulations (QLD in particular)?

Cheers
Alan
(like the one pictured)

1 attachment · Log in to view

www.dasrestoparts.com.au

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 17 May 2007, 9:35 pm

#592003

I don't think they have a locking mechanism......................so no.

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 · 17 May 2007, 9:50 pm

#592007

I think you may be right craig - I thought the 'teeth' (see below) were used to lock it but on all the pics I have seen don't have a button on the end of the lever.

From a bit more googling on the boostcruising forums and other ricer/rally places, looks like they aren't legal due to the simple fact of safety (potential leak and thus failure).

Still keen for actual facts though, as I've learnt not to believe everything I read on forums 😉
On second thoughts, that may contravene whatever advice I receive on here.... hehehe :P

1 attachment · Log in to view

www.dasrestoparts.com.au

Caroneten Seriously Crusin Dubber

135 posts · joined Jun 2005 · 17 May 2007, 10:01 pm

#592013

Had a hydraulic turning brake and a park lock in my baja took it to get the rear discs approved and they said nothing and it stands out like dog balls..

greedy53 Bishop of Volkswagenism

3,062 posts · joined Mar 2006 · 17 May 2007, 10:09 pm

#592017

there usto be a hydrokic break lock on the market you pushed the break down than turned the key locking the breaks on

👍👍😂🙅🥷😬🤓

Judsons4eva Officially Full-On Dubber

270 posts · joined Oct 2004 · 17 May 2007, 10:09 pm

#592018

The ADR stipulates the handbrake MUST be mechanically applied. So under the National Code of Practice for Light Vehicle Modifications any modification must continue to comply with the intent of the ADR. So if Qld ttransport are on the ball they would not allow a hydraulic hand brake.

Ken

550 Porsche Spyder
56 Oval mit Judson
96 Porsche 993 C2

Judsons4eva Officially Full-On Dubber

270 posts · joined Oct 2004 · 17 May 2007, 10:15 pm

#592021

ADR 35 states
35.2.2. ‘Parking Brake System 35/00’
35.2.2.1. The vehicle shall be equipped with a ‘Parking Brake System 35/00’ such
that in the applied position retention is effected by mechanical means,
and the braking effect is achieved by either:
35.2.2.1.1. the frictional force developed between 2 friction surfaces; or
35.2.2.1.2. the frictional force developed between two friction surfaces, together
with a ‘Parking Mechanism 35/00’ as defined in clause 35.1.17.

www.comlaw.gov.au/.../0/4072D6D820A6E230CA2571E80024870E/$file/ADR3500FINALFRLI.pdf

[ Edited on 17-5-2007 by Judsons4eva ]

550 Porsche Spyder
56 Oval mit Judson
96 Porsche 993 C2

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 · 17 May 2007, 10:46 pm

#592028

Cheers for the info guys.
Alan

www.dasrestoparts.com.au

xornge666x Wolfsburg Wizard

460 posts · joined Sep 2006 · 17 May 2007, 10:49 pm

#592029

turn the backing plates upside down... works fine. Ive done it. You might have to swap left to right too I think, but definately works.
Use the original cables...

[ Edited on 17-5-2007 by xornge666x ]

BiX Veteran Volks Folk

2,499 posts · joined Sep 2002 · 18 May 2007, 9:48 am

#592073

Das, whats said above it right, you must run a separate mechanical brake. Though the rally boys get around this (and its on my list of mods for the next monrh) buy either having a separate lever, or the other method is having the master cylinder attached the back of the std lever with a pin. This means you still have the cable brake, but the hydraulic comes into affect sooner and still uses to ratchet. So fdor adr’s you still have a cable brake fitted, but you really only use the hydraulic one with the std ratchet.

I have no sympathy for my car, only the wallet that pays for it!
Go hard or go home!!!!