does anyone have an air flow meter in the brisbane area for a 76 kombi fuel injected
0280200020 VW022906301D
this is what mine looks like. The butterfly? broke. Alternatively has anyone had experience with welding this material?
mate try JB weld, I have used it to fix the 'unfixable'
try the states sites, lots of efi guys there.
This disclaimer does not reflect the thoughts or opinions of either myself, my company, my friends, or my dog: don't quote me on that; don't quote me on anything; this disclaimer is subject to change without notice; text is slightly enlarged to show detail; resemblance to actual persons, living or dead, is unintentional and coincidental; dry clean only; do not bend, fold, or mutilate; anchovies or jalapenos added to this disclaimer upon request; your mileage may vary; no substitutions are allowed; for a limited time only while supplies last; offer void where prohibited; this disclaimer is provided "as is" without any warranties expressed or implied
this is how I fixed it, but i left the ignition on all day so the battery is flat and it won't go
Back in battery recharged bolts trimmed down to size and it goes. However it must be sucking in too much air as is rough on acceleration and popping so it will have to be replaced. Am trying to see if the vane is able to be ordered from bosch.
Cheers tom
Any ideas where I can get one in brisbane area?
Cheers Tom
Yeh ill see what i can do for ya give me a call
Andrew 0407373781
Don't let body work get in the way of real suspension travel
I think Buggy Brad has one available
Those valves always break
custom offroad has one however it comes with a motor. Where is buggy brad located?
On the forum right here
still chasing an air flow meter if by chance there is one around. cheers tom
