WTD: Single port tinware in good condition.

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 2 Dec 2007, 9:02 pm

#623238

Im after good condition tinware for a single port motor. It will all be powder coated, so I need it to be rust free with no dents or cracks. I don't need the shroud.

PM if you have what I'm after.

Would prefer Sydney.

Cheers
Craig t

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 3 Dec 2007, 6:30 am

#623276

1100 36hp 1200 40hp 1300 single port or 1500 single port ????????????????

do you need all the bits or just some

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 3 Dec 2007, 9:05 pm

#623411

1300/1500 single port (same?!).........................need all, but not the shroud.

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 6 Dec 2007, 9:03 pm

#623798

bump

Calcool Fahrvergnugen

965 posts · joined May 2005 · 7 Dec 2007, 9:42 pm

#623891

Hi Craig,

As usual I think I have what you need. We just had a baby this week so I will have a look over the weekend and you can come and grab the drive shafts and tinware while you are at it.

Cheers,

David

0418 117 622