I've got a '78 mk 1 golf that has some special bits. I cant get photos for a while cause the car is stored some miles away. She has been parked for a few years , but basically I'm wondering if anyone can help regards what some of the bits are worth if I was to part it out, of course I'm open to offers as a whole.
The engine is based on a 1600 Heron block, overbored.(These were used by formula 3, producing 13 000 rpm 300 hp naturally asperated)
Cosworth pistons machined crown for 7.7 : 1 comp
Audi racing crank offset ground for o/all 1800cc capacity.
Good condition GTI head
Close ratio rally 5 speed box.
Haltech f5 efi injection.
4-1 extractors
Golf diesel ex manifold for bolt on turbo ceramic heat barrier coated (not fitted)
Late model vented brakes that have only 200k's or so.
Hipo clutch 210mm, set up by Direct Clutches Bris👍
Engine has run turbo at 23 lb boost for in excess of 200fwhp
15 x 6 alloy wheels with as new yoky's
Fixed 1/4 vents
Plastic 'never crack' dash & other plastic body accessories.
Audi 5e sunroof grafted into roof but sealed up as needs seals n afew tweaks.
SAAS seats f/c
Bit of rust in a pillar and doors.
PLEASE HELP
cheers Matt
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
try the selling section
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
talk to crazy george he loves those things
1 1963 356b porsche coupe
2 1960 karmann ghia cab
1 1965 karmann ghia cab
1 1966 karmann cab
1 1961 split ute
1 1967 split p/van
1 1952 standard bug
1 1963 ragtop
1 1960 ragtop
2 1954 ovals
1 1956 oval baja project
1 1957 oval flying flea
Yeah . When has George got any money. That engine block is way special if you want to make reliable horsepower, I would like a realistic offer
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Would this motor be formula 3 legal??
Futue te ipsum!!!
Good question. I dont know thier rules. I think they have a displacement limit but no idea really. Hoping someone here would know. If the overbore isn't legally a prob, just displacement limit, another crank could be offsetground to shorten stroke to get within spec. All I know is this engine is oversize, nearly 1800cc. I did not build it, but I had the head off doing the turbo and injection mods some years ago.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
try vwwatercooled.org.au someone there may be interested
see.... air and water do mix 😉
1974 1300
1997 MK3 Golf GL
2003 NB Cabrio
2012 Golf VI GTI
2014 Audi A4 Quattro
what about Mr Been? he has a stable and funds + its been a while since he had an old school golf, only problem i his r32..i'd still give him a call he knows so people.
Stephen
want any vw bits old but like me, Made in Germany!!!
