Skip to content
Aussieveedubbers

WTD: Windscreen for '56 Oval & Seal

0 likes
Share Share on Facebook Share on X Share on Reddit

Nevada51 Seriously Crusin Dubber

169 posts · joined Aug 2005 ·

#645921
Anyone know where I can source a new front screen for a '56 oval at a reasonable price? Preferably in the SE suburbs (Melb).

I'm also after a seal (that takes the aluminium trim) for the screen as well, Wolfsburg West or West Coast Metric only. Anyone have one or know where I can get one from (other than from US)

Cheers
Cam

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#645927
you can get the seal over night from Vintage in Sydney 02-9789-1777 WCM best quality
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#645932
I believe You will have to get the windscreen glass cut
at Windscreen Obrien or similar
from Laminated glass..
it flat glass...

it may be more economical to have two done...

The widscreen rubber may the same as a rear window rubber 1958-67 [from a bad memory?]
not sure how the aluminium strips would fit
maybe use the original strips..

Hopefully someone can confirm this

LEE
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#645935
The screens are available new here in Sydney but shipping would be a problem

there should be a place in Melb that u can purchase new or get one cut if you have a sample or old screen
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

BUGBOY Moderator Chief Toy Dude / Head Cruiser

2,147 posts · joined Aug 2002 ·

#645973
I had some done a few years ago, I'm looking at getting some more done.
The main problem was the getting the correct thickness of glass and then when I did I had to purchase the whole sheet (pain) etc.
It was enough to get 8 screens.
Everything 36HP !
Change over king and link spindles
6-12volt semaphores

Find us on Facebook

Nevada51 Seriously Crusin Dubber

169 posts · joined Aug 2005 ·

#646226
Nathan you are the Man keeping the VW dream alive 🙂

For those interested you can order the screens from National Windscreens....for $295 each 👎

VW54, I'll try Vintage for the seal - cheers

Cam