Hello everyone. i have for sale a 1916cc type 3 engine for sale built by Mike from Custom Bugs and Buses in Penrith. The engine was built about 18 months a go and has 0 road km on it. The only work its done is about 30hours of dyno tuning. Engine is fuel injected and run by a Microtech LT8s ECU, Scat lifters, Chro-moly push-rods, Engle cam, heavily ported Mahle heads, Mahle pistons, bottom end balanced, HD clutch, custom headers(tucked up high so car can sit low), SS muffler, big oil cooler,HD oil pump, new 009, elec ignition, steel braided lines to oil cooler and heaps of other all new goodies. Engine is puting out 88hp at 3800rpm and 495 ft lb of torque at 3300rpm. Its currently in a late wagon whos body is no good but its sitting on a rebuilt pan with all detailed suspension, gear box, new CV, wheel bearings, empi shifter, polyuerethane bushes, shocks etc. I have all receipts and dyno printouts. Everything is new and never driven and I have to get rid of it due to no more garage. $9000 for everything or $7500 for engine and ECU. Car is located in Melbourne. Contact Denis on 0402 208 073 for any questions.
veedubsub wrote:Hello everyone. i have for sale a 1916cc type 3 engine for sale built by Mike from Custom Bugs and Buses in Penrith. The engine was built about 18 months a go and has 0 road km on it. The only work its done is about 30hours of dyno tuning. Engine is fuel injected and run by a Microtech LT10s ECU, Scat lifters, Chro-moly push-rods, Engle cam, heavily ported Mahle heads, Mahle pistons, bottom end balanced, HD clutch, custom headers(tucked up high so car can sit low), SS muffler, big oil cooler,HD oil pump, new 009, elec ignition, steel braided lines to oil cooler and heaps of other all new goodies. Engine is puting out 88hp at 3800rpm and 495 ft lb of torque at 3300rpm. Its currently in a late wagon whos body is no good but its sitting on a rebuilt pan with all detailed suspension, gear box, new CV, wheel bearings, empi shifter, polyuerethane bushes, shocks etc. I have all receipts and dyno printouts. Everything is new and never driven and I have to get rid of it due to no more garage. $9000 for everything or $7500 for engine and ECU. Car is located in Melbourne. Contact Denis on 0402 208 073 for any questions.
How much torque and how many hours dyno time??????????? Surely a typo....
To put everyone straight....yes those figures are correct. She is tuned to perfection for everyday use because that is what I requested from Mike...hence the dyno time. Everything fits under the standard lid. When Mike was tuning this engine he had a 5 lt commodore there that he was tuning and thing had less torque then my engine.
The price includes everything. Engine, ECU, harnes, etc... Basically install and go. I will take a photo of the dyno printout and post it. Heads are from the states
Somethings definantly wrong with the numbers, an engine at 3300rpm with 495ft lbs would be producing 311hp, and an engine producing 88hp at 3800rpm has 121ft lbs at 3800rpm. I think the torque number is wrong as i really doubt its producing that much only being an NA 1916cc, dyno graphs would be nice to see though
