Skip to content
Aussieveedubbers

removing silicon and spraying

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

koolkarmakombi enkarmarising

2,078 posts · joined Jun 2003 ·

#63855
I have cut my windscreen out of my kombi. It was glued in with various attempts to waterproof a completely stuffed rubber. Ive scrapped most of it off but want to know what will dissolve it so I can phosphoric acid the trace of rust Ive wirewheeled back, fill, then paint the screen frame.

I want the paint to stick, and the silicon will prevent that. I will probably have to use it on the body too as the current paint job has been polished with all sorts of shit over its sad excuse for a life!

My plan is to do the screen frame, put the screen back in then fix the other few bits and bobs in the body then spray the whole bus under my house. I cannot afford the few weeks it will take with no bus. The waterleaks in the screen needed to be done first so out it came.

Any other tips welcomed inc screenmounting tips

thanks:bounce:bounce

5PL1TDCS10N Insano Dub Head

845 posts · joined Jan 2003 ·

#64342
Automotive Paint thinners might work too. get a second opinion from an Auto paint shop. They should know...

helbus Administrator Mad fabricator, paint and body

7,386 posts · joined Sep 2002 ·

#64458
If there has been actual silicon used, not mastic which dissolves, then you may have to resort to mechanical means of removeal. This would mean that you would have to get the wire wheel to take the silicon sealer off as well.
If there is any mastic sealer then you will be able toremove that with prepsol or thinners. 😉
EJ22 into Bay Microbus - Finished project build thread- click on this spot here for info

baybuscamperkid prince of insufficient light, ruler of heck

4,316 posts · joined Aug 2002 ·

#65088
i had to use a metal scraper on mine to get the silicone off
Reimagined/Recycled/Upcycled Cool