hey
how do people adapt aftermarket seats to early bays (pre 72) kombis.
cheers
rhys
kombi_kid Moderator Good Kid too many projects
124 posts · joined Aug 2002 ·
it aint just cool its aircool'd
adapting front seats-kombi
crazyfiggi Wolfsburg Wizard
657 posts · joined Jun 2003 ·
im also interested in how this can be done, as mine a very stuffed.
wouldnt mind fiting up a pair of wrx bucket seats😀
wouldnt mind fiting up a pair of wrx bucket seats😀
fish Wolfsburg Wizard
584 posts · joined Apr 2003 ·
just grab you welder and weld in the required brackets, or drill and bolt fastening points in. as long as you get a modification cert for rego your on your way. P.S. not all seats are small enough to give you room between the seat and the steering wheel. better off getting one from the wreckers first and trying it out.
Drink and drive your a bloody idiot!!! make it home you'r a legend !!!!
Robo Compulsive Aussie Vee Dubber
4,491 posts · joined Feb 2003 ·
I just put some EB falcon seats in mine, they had flat sliders and only needed some mounting bolts welded on to fit, heaps better, longer squabs and you sit higher, also you can still move them backwards and forwards on the original runners. I got them for twenty bucks at the tip!
Rob.......
Rob.......
Boxer Power
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft
kombi_kid Moderator Good Kid too many projects
124 posts · joined Aug 2002 ·
i got some here out of some car unsure what but they fit nice!!!i thought thats how u guys do it i am just gonna weld in some angle and bolt it to that!!!
cheers
rhys
cheers
rhys
it aint just cool its aircool'd
kombi69 Seriously Crusin Dubber
193 posts · joined Jul 2003 ·
Hi Robo, you mention the EB falcon seats can move in the original (VW?) runners. Why do they need mounting bolts? It sounds like you mean they slip straight into the seat runers on the kombi body.
thanks,
thanks,
baybuscamperkid prince of insufficient light, ruler of heck
4,316 posts · joined Aug 2002 ·
ive got RX3 buckets in mine. very comfy, small enough. as for mounting, on the drivers side i am bolting on the lower part of a kombi seat and will upolster over it when i redo the upolstery so there is full movement and a stock look. on the passenger side i am using a set of Ford Laser rails as they seem to be the same as the RX3 rails and are completely removable. one side bolts to the seat, one to the wheel arch and an equal height bracket and bingo u have a seat that has full movement and the runners are similar enough to the kombi drivers side ones to look stock.
Reimagined/Recycled/Upcycled Cool
kombi_kid Moderator Good Kid too many projects
124 posts · joined Aug 2002 ·
these have runners on em so they are adjustable so if i mount them straight onto the chassis it wont matter!
cheers
rhys
cheers
rhys
it aint just cool its aircool'd
Robo Compulsive Aussie Vee Dubber
4,491 posts · joined Feb 2003 ·
Hi Kombi69
The runners on the ford seats don't fit the VW tracks, the ford seat runners are flat, but the mounting brackets are not, I had to cut these off with a grinder. I bought some high tensile bolts and welded these to the ford runners, the ford seat runners sit nice and flat on the floor where the OEM seat was.
I just drilled new holes for the bolts through the floor and used 2.5 inch washers between the nuts and the floor underside, you have to do this to stop the bolts pulling through in the event of an accident, the washers give the mounting bolts a larger surface area to have to pull through, this is as strong as the spot welded VW tracks, these seats are not as fancy as the Jap import ones, but I got two in very good condition for $10.00 from the tip, and they are a quantum leap in comfort from the VW planks.
Rob......
The runners on the ford seats don't fit the VW tracks, the ford seat runners are flat, but the mounting brackets are not, I had to cut these off with a grinder. I bought some high tensile bolts and welded these to the ford runners, the ford seat runners sit nice and flat on the floor where the OEM seat was.
I just drilled new holes for the bolts through the floor and used 2.5 inch washers between the nuts and the floor underside, you have to do this to stop the bolts pulling through in the event of an accident, the washers give the mounting bolts a larger surface area to have to pull through, this is as strong as the spot welded VW tracks, these seats are not as fancy as the Jap import ones, but I got two in very good condition for $10.00 from the tip, and they are a quantum leap in comfort from the VW planks.
Rob......
Boxer Power
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft
Member of DMLRK.....Die Mittler Lebuns Resto Komeradschaft
BiX Veteran Volks Folk
2,499 posts · joined Sep 2002 ·
I run an aerotech drivers seat and a honda prelude passenger seat. Just welded flat onto the bases and made sure put a bit of bracing in. Just make sure u use the correct grade bolts, washers etc when fitting.
helbus Administrator Mad fabricator, paint and body
7,386 posts · joined Sep 2002 ·
We have SAAS seats mounted directly to the floor, no slide. They are really comfortable, and as we are both tall, we have no probs.
My mechanic who is just over 5 foot tall gets a bit shitty though. 😎
My mechanic who is just over 5 foot tall gets a bit shitty though. 😎