Hi
I have read on here that you can get a clip on seal for the bonnet.
I had too remove the seal retainer strip for my daughters 73 beetle as it was badly rusted.
Wad thinking off bending up some stainless and pop riveting it on to retain the original seal but the clip on sound heaps simpler.
Where would i get one.
Thanks Trevor
Clarke rubber will get you out of trouble ,you need the pinchweld with the rubber on it and you clip it on the lip of the bonnet,you can use it for the decklid as well👍
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFouryep dito
👍👍😂🙅🥷😬🤓
the bonnet and engine lid both have a Mexican seal thats available from Vintage 02-9789-1777
Hnag On
I grabbed some pinch weld but how the heck does that work. Pinch weld is designed too push on a flat lip and provide a seal parralell with the lip. The bonnet and boot lip is at right angles too where the seal needs too be. Second, how does it seal around the catches at the bottom and also at the top of the bonnet.
Got the wrong pinchweld. You can find the right one, but I'd go the mexican.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Thanks guys
Yep, mexican is the way to, clips onto the bonnet and boot and no more rust trap.
Thanks Heaps
Is the mexican one long enough to go around the Super/L Bug bonnet?
Clark Rubber is great - around 100 different seals available in my local store...
Pay your debts, CxxT
The guy at vintage said you have too use the top section off an original seal, the part that pushes into the holes and then the mexican does that rest. Is the Super/L an L for longer than normal bonnet.
If it is, maybe they make one for that as well.
