This.....
...this...
...and this...
...go in this...
...and I'm done!
axlepressbutton Seriously Crusin Dubber
114 posts · joined Dec 2005 ·
Ghia- DONE!
Yogie Moderator Custom Title Time!
1,608 posts · joined Jun 2003 ·
Looks great. How many sleeps do you think till you are finished?
Yogie
Yogie
gellecan Seriously Crusin Dubber
134 posts · joined Feb 2006 ·
Can;t wait to see the finished ghia looks sweet👍😎
gellecan Seriously Crusin Dubber
134 posts · joined Feb 2006 ·
What size is the engine and what are the carbs and size keen to carb my ghia but don't now which way to go
axlepressbutton Seriously Crusin Dubber
114 posts · joined Dec 2005 ·
About 2 weeks at my current rate, although silly little things keep holding me up so we'll see.
The engine is a 2054 with 44 Webers.
I've been spending a fair bit of time in the U.S. and arranged the engine build, transmission and hide-away exhaust system while I was over there. It arrived this week. One air filter got a little squashed in transit, and first job is to move that in line fuel filter.
I think I got a good deal, but I wouldn't recommend it now the $AUS has dropped.
I'll shoot video of firing her up for the first time and post a link on here.
Stuart
The engine is a 2054 with 44 Webers.
I've been spending a fair bit of time in the U.S. and arranged the engine build, transmission and hide-away exhaust system while I was over there. It arrived this week. One air filter got a little squashed in transit, and first job is to move that in line fuel filter.
I think I got a good deal, but I wouldn't recommend it now the $AUS has dropped.
I'll shoot video of firing her up for the first time and post a link on here.
Stuart
poppy Learner Dubber
16 posts · joined May 2008 ·
Looks Great 👍 .. looking to strip and paint our 63 over christmas... think you have the same colour as ours.. do you have the code? is it the original colour?
Cheers
Brent
Cheers
Brent
axlepressbutton Seriously Crusin Dubber
114 posts · joined Dec 2005 ·
Mines a 59 and half, but I painted it in a 1961 colour, Sierra beige. I wanted that Cal beach cruiser look and love the VW creamy beige colours.
It was badly sprayed a bright red when I bought it- only found a few traces of the original colour and it looks like it was almost Mango?
It was badly sprayed a bright red when I bought it- only found a few traces of the original colour and it looks like it was almost Mango?
vwkg Schnell
314 posts · joined Jan 2007 ·
Dude that looks so cool.
Cannot wait to see it finished.
Absolutely loving this car👍
Cannot wait to see it finished.
Absolutely loving this car👍
VWFREAK VWFREAK
2,577 posts · joined May 2004 ·
Nice, makes me miss my old girl, great stuff.
poppy Learner Dubber
16 posts · joined May 2008 ·
Yes ours i believe is seirra beige as well - but with a white top - love the two tone...mind you love the roof rack on them as well...
are you heading off on the KG cruise next month?
are you heading off on the KG cruise next month?
VW-VARIANT-L Seriously Crusin Dubber
154 posts · joined Jul 2007 ·
Great looking Ghia, you'll love it when it's finally on the road.
Sorry, but what do you mean by " a 59 and half " ?
Sorry, but what do you mean by " a 59 and half " ?
axlepressbutton Seriously Crusin Dubber
114 posts · joined Dec 2005 ·
It's the first of the non Low light Ghia's, but still has some of the earlier cars feature like the upright (same as oval) fuel tank.
I assembled the rear axles on the new transmission this week. Had plenty of trouble getting the bearings to seal, but success in the end.
I had to take a lot of components off the engine to squeeze it in, but I'm pretty happy with the way she's looking.
Tomorrow I run the new fuel line, fit the muffler and start getting my head around wiring it up. I've been putting off fitting the new loom because I know it's going to be a head f@#k, but I can't put it off any longer. Car needs done!
I assembled the rear axles on the new transmission this week. Had plenty of trouble getting the bearings to seal, but success in the end.
I had to take a lot of components off the engine to squeeze it in, but I'm pretty happy with the way she's looking.
Tomorrow I run the new fuel line, fit the muffler and start getting my head around wiring it up. I've been putting off fitting the new loom because I know it's going to be a head f@#k, but I can't put it off any longer. Car needs done!
newghia stock is for people who cant think outside the square
679 posts · joined May 2008 ·
Awesome work, i'm jealous of your engine bay 😁
Step up to get out !!!
vdubrod Casual Dubber
49 posts · joined Oct 2008 ·
Looks good I am a few months behind you in my resto. I hope my detailing is as good as yours well done
cram Officially Full-On Dubber
368 posts · joined Jan 2005 ·
sweet looking ghia!
what sort of rims are going under?
what sort of rims are going under?
axlepressbutton Seriously Crusin Dubber
114 posts · joined Dec 2005 ·
I've thought long and hard about that one!
I'm a fan of Speedmaster wheels on Ghia's, but I don't think you can go wrong with stock (see picture 4).
I'm a fan of Speedmaster wheels on Ghia's, but I don't think you can go wrong with stock (see picture 4).
grumble Son of Jim - Creator of Good
2,672 posts · joined Jun 2008 ·
very nice,it's good to see a very well done Ghia.I hope the rest of the work goes well regards les
badkarmann Seriously Crusin Dubber
121 posts · joined Mar 2008 ·
looking good buddy👍
axlepressbutton Seriously Crusin Dubber
114 posts · joined Dec 2005 ·
Might spend the next 2 days banging my head against the garage wall.
A simple job like bolting the shocks onto the new beam turned into a major engineering job to get the things aligned- They were 2" out of upright each side because of my 4" narrow beam. Anyone else heard of shock adjusters? I know all about making them now. Hope the the engineer approves.
Pushed hard today to get the engine wired to run, and nothing but a 'click' from the new out of the box bosch starter. I took the thing back out and bench tested it (something i should have done before fitting) and the thing has a dead short- confirmed by my auto electrician house mate.
These two upsets, and some wrongly supplied tinware has really got me wondering why I'm putting my life on hold for this thing❓🤪
Tomorrow I might just go ahead and fit the carpets- how bad can that be?
A simple job like bolting the shocks onto the new beam turned into a major engineering job to get the things aligned- They were 2" out of upright each side because of my 4" narrow beam. Anyone else heard of shock adjusters? I know all about making them now. Hope the the engineer approves.
Pushed hard today to get the engine wired to run, and nothing but a 'click' from the new out of the box bosch starter. I took the thing back out and bench tested it (something i should have done before fitting) and the thing has a dead short- confirmed by my auto electrician house mate.
These two upsets, and some wrongly supplied tinware has really got me wondering why I'm putting my life on hold for this thing❓🤪
Tomorrow I might just go ahead and fit the carpets- how bad can that be?
newghia stock is for people who cant think outside the square
679 posts · joined May 2008 ·
Just wait till you first drive it in the sun........ nobody will wipe the smile from your face ! good luck
Step up to get out !!!
Type3Sicko Wolfsburg Wizard
596 posts · joined Dec 2006 ·
Matey, THAT is one tasty Ghia, let us know when she's fired up and registered 🙂 Your busted knuckles and bruised wallet will be a vague memory on that first 1/4 mile run or 3 hour drive to get the morning paper and milk....very inspiring
How many is enough?
the customer Learner Dubber
13 posts · joined Jun 2008 ·
awesome ghia mate, looks great and should go pretty well too. hope you have better luck with the rest of the assembly.
cheers
Matt
cheers
Matt
axlepressbutton Seriously Crusin Dubber
114 posts · joined Dec 2005 ·
Update-
Engine in and running- had to fit oil breather box to ease crank case pressure.
All glass now in.
Wiring nearly sorted, but I can't get charge; might be a faulty (new) voltage regulator).
Carpet in.
Door cards and seats go in today.
Looking for roadworthy before the weekend- tell me I'm dreaming!
Pictures soon...
Engine in and running- had to fit oil breather box to ease crank case pressure.
All glass now in.
Wiring nearly sorted, but I can't get charge; might be a faulty (new) voltage regulator).
Carpet in.
Door cards and seats go in today.
Looking for roadworthy before the weekend- tell me I'm dreaming!
Pictures soon...
lowrider Officially Full-On Dubber
329 posts · joined Sep 2002 ·
that's nice... very tasteful
axlepressbutton Seriously Crusin Dubber
114 posts · joined Dec 2005 ·
Okay, update.
Car is done and I took her in for the rego last week. Good news, no horrors and no surprises. The garage ironed out a few wiring problems I had, commented on it being a bit low and that was that.
The bad news?
After dropping her off I went to Queensland transport to get the word on how fast the paperwork at that end would take. It seems I need an L02 inspection - Pre 1972 imported vehicle safety compliance inspection.
(My car is originally a U.K. Ghia that I brought over 4 years ago)
Queensland transport have given me the list of guys up this way that are qualified to do the inspection, one! Once I get it inspected it's back on the trailer to take her to Q.T. so that they can eyeball the plate
After talking to the L02 guy on the phone it seems he is willing to do the inspection after his day job one evening at my house, but there is a further problem. He asked about year of manufacture and on my import documents for the vehicle I have discovered that the date of manufacture of my car is wrong. Long story short, I've had to send my documents back to Adelaide to get the mistake corrected. This takes a minimum of a week!
It seems that whether manufactured in 1959 or 1960 is a big thing when it comes to imported vehicles and the safety regulations including seat-belts front AND rear, child restraints etc. Front belts for me are a must, but I really don't want to put my car through the rest of the scrutiny and butchery of rear belts when it's most definitely not going to be a people carrier. Proving it's a 59 car gets me out of that.
The inspection guy also mentioned specific measurements to determine if the rear of the car is for carrying passengers or a luggage shelf??? I think I'm going to load it up with suitcases for when he comes by! This inspection is starting to worry me, so I'm lifting her up a few inches before he comes round too.
So, she's sitting in my garage waiting for the postman to bring me a letter. If the weather clears up I'll get some pictures.
Car is done and I took her in for the rego last week. Good news, no horrors and no surprises. The garage ironed out a few wiring problems I had, commented on it being a bit low and that was that.
The bad news?
After dropping her off I went to Queensland transport to get the word on how fast the paperwork at that end would take. It seems I need an L02 inspection - Pre 1972 imported vehicle safety compliance inspection.
(My car is originally a U.K. Ghia that I brought over 4 years ago)
Queensland transport have given me the list of guys up this way that are qualified to do the inspection, one! Once I get it inspected it's back on the trailer to take her to Q.T. so that they can eyeball the plate
After talking to the L02 guy on the phone it seems he is willing to do the inspection after his day job one evening at my house, but there is a further problem. He asked about year of manufacture and on my import documents for the vehicle I have discovered that the date of manufacture of my car is wrong. Long story short, I've had to send my documents back to Adelaide to get the mistake corrected. This takes a minimum of a week!
It seems that whether manufactured in 1959 or 1960 is a big thing when it comes to imported vehicles and the safety regulations including seat-belts front AND rear, child restraints etc. Front belts for me are a must, but I really don't want to put my car through the rest of the scrutiny and butchery of rear belts when it's most definitely not going to be a people carrier. Proving it's a 59 car gets me out of that.
The inspection guy also mentioned specific measurements to determine if the rear of the car is for carrying passengers or a luggage shelf??? I think I'm going to load it up with suitcases for when he comes by! This inspection is starting to worry me, so I'm lifting her up a few inches before he comes round too.
So, she's sitting in my garage waiting for the postman to bring me a letter. If the weather clears up I'll get some pictures.
newghia stock is for people who cant think outside the square
679 posts · joined May 2008 ·
Hope it all goes well. just took mine out for a run & scared a few walkers !!!!
got waves from 2 hot rods as well. (its formal time )
Cant see why the seat / measurements would be a problem, they are all the same...even the ones from here.
it is a 2 + 2 anyway.
got waves from 2 hot rods as well. (its formal time )
Cant see why the seat / measurements would be a problem, they are all the same...even the ones from here.
it is a 2 + 2 anyway.
Step up to get out !!!
grumble Son of Jim - Creator of Good
2,672 posts · joined Jun 2008 ·
The manufacture date is often on the speedo,wiper motor and I think fuel sender in early ghias and beetles. This date is usually about 3 or 4 months prior to assembly. This may help.Regards Les
grumble Son of Jim - Creator of Good
2,672 posts · joined Jun 2008 ·
Sorry I was forgetting that you have gone 12 volt ,How about chassis number to verify manufacture Regards les
axlepressbutton Seriously Crusin Dubber
114 posts · joined Dec 2005 ·
Thanks Les,
Yeah, I verified the date with my VIN/chassis number- 2859682 - 1959
The fact that it's not a low light, and any cars none low light are commonly referred to as 1960 and after.
All good though, received the new paperwork today.
Yeah, I verified the date with my VIN/chassis number- 2859682 - 1959
The fact that it's not a low light, and any cars none low light are commonly referred to as 1960 and after.
All good though, received the new paperwork today.
grumble Son of Jim - Creator of Good
2,672 posts · joined Jun 2008 ·
Brilliant we can expect her on the road shortly then. I don't see why it would need rear belts as they are a coupe 2 door 2 seat. Although I have carried 4 adults at various times in the past (35+years ago) with luggage behind rear seat.I must admit she sat a little low in the bum. Still a beautiful little car.