Type 4 to 1600 interchanging parts

old skool Learner Dubber

7 posts · joined Nov 2008 · 1 Dec 2008, 8:05 pm

#682518

Hi Gang 🙂
Have just been given a 1600 type 1, twin port, it is missing a dizzy and carbie,
I have a 1800 type 4 with twin carbies and a blown crank case,
QUESTION: Can I use one of the carbies or both of the Type 4 on the 1600, will the Type 4 distributer work on the type 1

Are their any other parts of the Type 4 motor that will fit onto the type 1

Old Skool aka Leigh.
__________________

GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL

http://www.adam.com.au/swancomp

cram Officially Full-On Dubber

368 posts · joined Jan 2005 · 1 Dec 2008, 9:39 pm

#682551

the carby manifold for the T4 is too wide for T1. so no.
not sure about the dizzy?

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 · 2 Dec 2008, 6:10 pm

#682687

Hi

The dizzy is interchangeable, it may have a slightly different advance curve

Steve

old skool Learner Dubber

7 posts · joined Nov 2008 · 2 Dec 2008, 9:37 pm

#682747

Thanks for the info, didn't think I was going to be that Lucky. Oh well on with the resto.

thanks again

GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL

http://www.adam.com.au/swancomp