Hope someone can help. Bought some new mirriors that fit in the top hinge of the door. The problem is cant get the old hinge out. Is there a special trick to knocking the hinge out or is it just bash away...🥲
ummm there is a cer clip (or 2) on it if i recal correctly.
No circlip, but usually a dificult job
remove the door
get a helper to support the door on a suitable support (pipe) under the hinge in question (with the door upside down cause your trying to drive the pin out via the top)
Belt the hinge pin with a fbh and a suitable drift.
OR
get the vw tool to do it in situ
OR
make a tool
someone on here posted pics a while back
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Here's a hinge tool, don't even have to take the door off for this one:
http://www.thesamba.com/vw/classifieds/detail.php?id=522550
Regards,
Matt.
That tool looks the best yet.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
I have been thinking for a while it would be beneficial for VW clubs to have these tools etc for the members to use.
If you BASH it out you will stuff the hinge and door completely use method as per above
Club Veedub Sydney has such a library of various VW tools and workshop gear for lending - but you must be a financial member to borrow. Come to a monthly meeting (next one on Dec 18) and enquire - secretary Bob Hickman is the custodian.
that IS one great Hinge Pin tool
Its the ONLY way to take a pin out without damaging
the door... etc...
Are New hinge pins readily available....???
I would like to replace My 4 pins one day...
without damaging the paint etc...
LEE
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---
wicked tool should put that on the budget
CHEERS KKUSTOM
like this one?
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourAny method will unfortunately bruise the paint.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
well paining the tops and bottoms of the hinges wouldn't be a large problem...
much lesser than when the OXY Acetalyne is used to heat up the hinges
Anyone hire one out???
LEE
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---
I might see if a friend can make some of these up....
