darrinc Commited Dubber
50 posts · joined Aug 2007 ·
can anyone tell me what to do if one of the fender mounting nuts lets go and drops inside the rear 1/4 panel????
fender nuts???
Sides Veteran Volks Folk
2,220 posts · joined May 2007 ·
Err, bummer - first thing I'd do is swear.
On a beetle you can get to some of them from the inside of the car by just taking the trim card out, so you might be able to get the fallen nut out with a magnet and then just fit a standard nut on the end of that bolt.
On a beetle you can get to some of them from the inside of the car by just taking the trim card out, so you might be able to get the fallen nut out with a magnet and then just fit a standard nut on the end of that bolt.
VWDCQ vice pres & web dude - vwdcqinc.org.au
Join a car club - get car peeps
My toys
'70 Hillclimb Bug 'Jezebel' w/- Haltech EFI - http://bit.ly/VwTNtQ
'60 KG Coupe - resto kinda started
01 New Beetle - gf's car, but I turn the spanners
Join a car club - get car peeps
My toys
'70 Hillclimb Bug 'Jezebel' w/- Haltech EFI - http://bit.ly/VwTNtQ
'60 KG Coupe - resto kinda started
01 New Beetle - gf's car, but I turn the spanners
eraser Fahrvergnugen
970 posts · joined Mar 2005 ·
yeppas should be able to get at it through the side panels, depending where it is etc would depend if you will even bother putting that extra nut on 😉