Sorry for the late reply Nils, have been away.
The one pce frnt is 10" wider than the narrow sand blazer style which is 1500mm.
So the wide one is about 1750, but I'll put a tape over it once available.
The early and late body is different across the wiper panel, the late panel is higher there, across the car.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Maybe RISKYBUG will elaborate on his gibberish?😂
Matt, half your luck that you have been away. So that would make it 5-6inchs wider than the cheetah kit that i have now, will have to have a look some time and see if thats suitible for what i am doing.
so as far as the front end shape you are talking about, would meen that it would mount up but would have a raised edge and would be looking under the bonnet if you looked at from inside?
Possibly a trade - a new front end for the bender when i am done with it? Early days , but a possibly
Quit calling rust patina
Trade is a great way to go mate, but fit is another story. We'll catch up soon and I'll show the differences.🙂
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
yeah i am at a bit of a loss then as far as the difference is concerned, never tinkered with a late model i guess!
will be at dubs in the coming weeks and will try to work it out, you going to be out there? if so might have to give you a phone number (used to get a bit of stuff at volksrestore when i was like 15 but couldn't for the life of me pick you in a crowd!) 😏
Quit calling rust patina
Mate your not the only one, time has been bad to me, hardly any of my dub mates seem to recognise me any more....has its good side but.
15...dont believe that one, yes I'll be at dubs, # is 0408 704 662
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
