What diameter steering wheel do you have?

1,769 posts · joined Oct 2004 · 31 Jan 2009, 10:13 am

#692656

Just wondering what diameter aftermarket / sports steering wheel does everyone have on their beetles?

I've currently got a 350mm diameter on mine which makes it feel like I'm driving a pedal car & has seriosly increased steering effort compared to stock wheel, I reckon about 380mm would be ideal, & am seriously considering going back to stock as I cant seem to find many options for wheels that are larger than 350mm diameter.

What have you got, where did you get it & how do you like it?

Cheers
Brendan

Calling all NSW Mid North Coast Veedubbers

Click Below

Mid North Coast VW

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 · 31 Jan 2009, 10:41 am

#692661

300 and 350mm are the standard aftermarket wheel sizes
there isnt much around over that

try a carrera superbug with 8" jellybeans running 235 tyres and a 10" dished steering wheel then u'll think ur bug has powersteering

if ur not after looks then later golf steering wheels are smaller but still bigger than 350mm but they fit the taper spline shafts which is 74 onwards so u would need to swap out a steerign shaft like in this thing

Smiley Veteran Volks Folk

2,125 posts · joined Oct 2008 · 31 Jan 2009, 3:23 pm

#692691

I have 350mm steering wheels in both my Bajas. Steering isn't particularly hard. Though when I drive I never dry wheel any car, power steering or not. I always have the wheels rolling a little if I can help it. Takes the strain off the power steering pump, or your arms.

If you said I was a Volkswagen man, you'd be right.

Special Air Service Chief "Gunna"

1,769 posts · joined Oct 2004 · 31 Jan 2009, 8:06 pm

#692750

When I'm shopping for wheels the quoted size (diameter) is the OD of the wheel, correct ? or is it an imaginary diameter in the centre of the grip (OD of grip - ID of grip) if you know what I mean?

Thanks

Brendan

Calling all NSW Mid North Coast Veedubbers

Click Below

Mid North Coast VW

pod i`ve got to finish this thing one day

4,980 posts · joined Dec 2003 · 31 Jan 2009, 8:09 pm

#692752

anything bigger than the stock sizes means a custom wheel ,which becomes very expensive ,i`ve asked auto parts before when i had my 4wd🙂

meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook https://www.facebook.com/FlatFour

rose doin it for d girls

2,036 posts · joined Dec 2004 · 1 Feb 2009, 1:11 pm

#692812

Mines 300mm and I don't have a problem with steering its a breeze.

And I always move the car before you start to turn the wheel.

You should try a 300mm on an old holden then you will know what effort is, especially in the summer.😂😂😂

frank2112 Officially Full-On Dubber

215 posts · joined Jan 2005 · 2 Feb 2009, 7:31 am

#692954

I run a 300mm wheel. It depends on what size tyres you have on the front as well as the general condition of the front end. I used to run the same wheel with 195's on the bug but now I'm running 145's. Steering is so much lighter. Looking at the MOMO site it seems 350mm is their size for all of their steering wheels. Small wheels on bigger cars make the steeering effort greater. I'm with Rose on that one. Old Holden's and small steering wheels are not fun at all.

Spare the Duct tape, spoil the job - Red Green