hey
i have a 76 bay bus 2l with twin webbers on board n i want to replace the old exhaust system yeah
ideas i need to either replace it with another stocko or put something a little bit more breathable on it for a little more legs for the old girl
any ideas and brands models etc would be appreciated
taa paul
fractal geometry; the inner most limits of mind altering abuse
Fantasy
http://seventhchronicle.com
Z = Z2 + C1/r = 1/0 = infinity
Barrels
www.barrelman.com.au
VW Workshop - aircooledgarage.com.au
allcooled.com.au
I'd like to hear too.
Just checking do you have the heater boxes with the two pipes per side and the trapezium shaped flanges?
If at first you don't succeed. Build, build again.
Vehicle: 1975 Special order delivery walkthrough panel based LCA pop-top camper. Motor: Nippon 1.8L Single port Wasserboxer, Transmission: 3 rib 002.
erm yeah i have the bog standard set up on my ride
however as im a priss in winter i want to keep heater boxes.. 😀
fractal geometry; the inner most limits of mind altering abuse
Fantasy
http://seventhchronicle.com
Z = Z2 + C1/r = 1/0 = infinity
Barrels
www.barrelman.com.au
VW Workshop - aircooledgarage.com.au
allcooled.com.au
mates go to calssic vw (george0 and have a look at his stock i think that there is a special onexhaust's he sponsers this forum
happy hunting
oh and he has a great s🙅ite to visit and he posts
here we go
Classicveedub.com.au
36 Bridge St Rydalmere 2116 NSW
PH 02 96384200 FAX 02 96384266
👍👍😂🙅🥷😬🤓
These are the headers i had custom made by CES racing. Pipes are 1"5/8 and are tuned length and mandrel bent. system runs forward to the front of the car with a 3 chamber turbo muffler located between the chassis rails and then between the chassis rail and the sill is a resonator and the system exits at the sill just in front of the RHR wheel.
ACCEPT THAT SOME DAYS YOU ARE THE PIDGEON AND SOME DAYS YOU ARE THE STATUE
Alder Outlaws VW Racing - check it out on fb!!
Well Brenndan, how does it sound/perform........pic's and vid mate!!!!!
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
would that fit a beetle as well brenden? i mean with a type 4 conversion by the way🙂
1 1963 356b porsche coupe
2 1960 karmann ghia cab
1 1965 karmann ghia cab
1 1966 karmann cab
1 1961 split ute
1 1967 split p/van
1 1952 standard bug
1 1963 ragtop
1 1960 ragtop
2 1954 ovals
1 1956 oval baja project
1 1957 oval flying flea
That'll do nicely.
Just stick it in the mail for me tomorrow couldya mate?
Probably the only exhaust in existence that wouldn't foul on my towbar. Full points for the side exit pipe too.
If you don't mind me asking, how much does getting something like that made cost? and did you have to source the manifold flanges, or are they an available part?
If at first you don't succeed. Build, build again.
Vehicle: 1975 Special order delivery walkthrough panel based LCA pop-top camper. Motor: Nippon 1.8L Single port Wasserboxer, Transmission: 3 rib 002.
As Greedy says go and see George he has some nice systems and they retain the heater boxes.Cheers Les.
I have just ordered some ceramic coated gt twin tip empis, so will let you know how they go when they are on.
cheers jono
DAK DAK DAK
system cost me $700 about 11 years ago. Mufflers and flanges are all generic and easily available. to put somehting like this on a type 4 in a beetle/bug you might want to get the pipe configuration changed slightly as it is really desinged to fit under a bus which does have a lot more room. Matt as you would know it sounds nothing like a VW. all i ever get is "has it got a subaru/ Porsche in it cause it doesn't sound like a dak dak"
Matt videos etc will happen sunday at dubs by the pub I mean pie. My mate is mounting a video camera (weather permitting) on the side of my bus for the cruise up the coast. He will also be hanging out the sliders taking pics as well
ACCEPT THAT SOME DAYS YOU ARE THE PIDGEON AND SOME DAYS YOU ARE THE STATUE
Alder Outlaws VW Racing - check it out on fb!!
