Skip to content
Aussieveedubbers

[VIC] 1800 engine

0 likes
Share Share on Facebook Share on X Share on Reddit

Wild1 Wolfsburg Wizard

448 posts · joined Jun 2006 ·

#697520
Due to having far too much on my plate at the moment I'm going to sell the 1800 that I have disassembled. I was going to rebuild it as a learning thing but after taking it all apart life interrupted and it's been sitting ever since.
I was told it was a runner but it was missing bits so I really don't know.

The bits missing as far as I can tell are:
-Alternator
-Distributor
-Spark plugs (leads were there)
-Thermostat
-Exhaust System/muffler
-Oil-filler-funnel-type-thing
-Heater Booster fan & hoses
-Some tinware
-Rocker Covers
-carbys
-valve adjusters
-fuel pump
-one of the flaps that stop hot air being blown into the cooling fan
-flywheel
but there may be more, as I'm no expert.

If you want a detailed look at everything I did with it I've got it laid out here:
http://forums.kombiclub.com/showthread.php?t=8386


This is as it sits now:






I'll throw in some things I had bought for it. One's a set of cam bearings and the other is a set of main bearings I think.



Local pick up only from Williamstown.

PM or call 0404 860 631

I'll take $300 or nearest offer

Marty

Wild1 Wolfsburg Wizard

448 posts · joined Jun 2006 ·

#697521
Just to give some idea, this how I picked it up:


With heads, barrels, etc off:


All apart:

Wild1 Wolfsburg Wizard

448 posts · joined Jun 2006 ·

#697681
guys, here are some more detailed photos of some bits:

left head:



right head:



and this is what the pistons look like: