bearing spacers?

Unity-28 TOO LOW? NEVER

1,742 posts · joined Nov 2002 · 11 Mar 2009, 9:08 am

#699977

Hey guys, is there a way of spacing out my rear drums 3mm, so that I can fit my Centre caps on the fuchs? I cant use spacers between the wheel and drum, as I have just the right amount of lug length for the wheel nuts. Can you get slightly bigger bearing spacers?

Thanks, Nectar.

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 11 Mar 2009, 9:42 am

#699984

BUT THEN THAT WILL REDUCE THE BRAKE DRUM CONTACT WITH THE BRAKE SHOE

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 · 11 Mar 2009, 9:58 am

#699988

Hi

Cut the 3mm off the end of your axle with a grinder.

Steve

greedy53 Bishop of Volkswagenism

3,062 posts · joined Mar 2006 · 11 Mar 2009, 4:16 pm

#700045

shit ya fast steve

👍👍😂🙅🥷😬🤓

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 · 11 Mar 2009, 5:14 pm

#700054

As Steve said 👍

altho longer studs arent hard to find
Porsche ones are usually a bit longer than standard bug

Unity-28 TOO LOW? NEVER

1,742 posts · joined Nov 2002 · 11 Mar 2009, 10:11 pm

#700145

Joel wrote:As Steve said 👍

altho longer studs arent hard to find
Porsche ones are usually a bit longer than standard bug

I have porsche ones already done to the hubs (verbus brand) they are 35mm in length. I dont want to go through pressing them out, and redoing it again....Looks like I will be hitting it with the grinder....

Thanks all, Nectar 🙂

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 · 12 Mar 2009, 8:41 am

#700202

Hi

You usually only need to remove the thread lead in section, when you have your drums off next give the end of the axle clean up. I had to do it on my daily 1303 to fit BBS wheels and also on my old 1302.

A friend of mine with Cookie cutters on his car had alloy hats made up to move his cap location out

Steve