rocknrob Insano Dub Head
844 posts · joined Dec 2003 ·
I'm losing heaps of oil...guessing its the rear main seal...whats involved in replacing it on an EJ22? been 20 years since i did this on V8s etc....🙅
subaru rear main seal
rocknrob Insano Dub Head
844 posts · joined Dec 2003 ·
oh yeah...any help appreciated...heheh😁
ian.mezz I never said, I could write or spell
3,913 posts · joined Sep 2004 ·
send ratbug a PM he just did his, I think there is a seal and a plate with a gasketrocknrob wrote:oh yeah...any help appreciated...heheh😁
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲
rocknrob Insano Dub Head
844 posts · joined Dec 2003 ·
so mainly...do i have to split the engine? or just pry the old one out and insert new one? thanx😎
Lovebuggy Seriously Crusin Dubber
156 posts · joined Dec 2008 ·
I havn't done mine yet, but I am led to believe you can just pri it out with a screwdiver and tap a new one back in.
ian.mezz I never said, I could write or spell
3,913 posts · joined Sep 2004 ·
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲
rocknrob Insano Dub Head
844 posts · joined Dec 2003 ·
cool...thanx guys👍
seagull Compulsive Aussie Vee Dubber
4,979 posts · joined Dec 2003 ·
The plate you see in this photo ( Black ) does not have a seal it is sealed with grey OEM sealent. You can get this from repco in a small tube .
The black / white cover plate in plastic seem to leek , while the ally ones dont.
PS get a factory rear main seal as well
The black / white cover plate in plastic seem to leek , while the ally ones dont.
PS get a factory rear main seal as well
Looking for that special lady : PM me for coffee & cake
rocknrob Insano Dub Head
844 posts · joined Dec 2003 ·
will do but going camping this weekend and taking 4litres of oil😁
OZ Towdster Keen to finish some projects
1,921 posts · joined Dec 2003 ·
We also keep quality rear main seals in stock at CVD
Don't let body work get in the way of real suspension travel
ratbug aka toddy101
439 posts · joined Jan 2003 ·
Yeah I got mine out by attacking it with the few screwdrivers and levering it out. Just mkae sure you don't mark or scratch the crank or engine surface the seal goes onto. And, when you put the new seal in, make sure it doesn't go in too far, this is the reason I had to put a new one in grr, they don't bottom out, and the front of the seal should be pretty much flush with where it goes into the engine.
Sharbuilt Beach buggy with Subaru 2L Turbo
Thunderanch Riot with Subaru 2L Turbo
Manxter with FA20turbo
Click here for wiring looms
Thunderanch Riot with Subaru 2L Turbo
Manxter with FA20turbo
Click here for wiring looms
rocknrob Insano Dub Head
844 posts · joined Dec 2003 ·
cheers ratbug...good information and Andrew...pm sent