Skip to content
Aussieveedubbers

semi auto beetle faults

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

gsa2at Slammed & Awesome Dubber

97 posts · joined Apr 2009 ·

#705056
new to this site - hi all
just bought a 68 semi auto beetle
a few minor rust issue to be sorted
engine purs though a bit greasy on the outside
the main question i have is what are the common easily fixed problems with semi autos
it grinds into gear which does not seem right or proper
i have a complete spare transmission with servos ; reservoirs and soem other bits that are usually attached
any advice on how to sort this out - some one must have the same problem ??
jack the beetle rides again !!!

pat Malone 1st Warning

9 posts · joined Mar 2009 ·

#705057
clutch issue
possible servo vacuum leak or vacuum hose leak
also check contact points @ gear lever and wire

gsa2at Slammed & Awesome Dubber

97 posts · joined Apr 2009 ·

#705060
thanks
so much i had suspected - i have all the servo system and hoses of a working transmission so will attach them and see if Jack changes smoother
jack the beetle rides again !!!

ctefeh Wolfsburg Wizard

479 posts · joined Apr 2005 ·

#705064
gsa2at,
Can also be it needs freeplay adjusted. Does your car "slam" into gear?

www.vwar.org is the site you should have a browse through for semi automatics.

You have spares, so you'll be O.K.

PM me and I'll forward you a copy of the bentley section for semi-auto's. A few of us here own semi-auto's so welcome to the lunatic fringe!

P.S. Take a digi photo of your engine, that includes the CV and post or PM. We can spot issues a mile away😂

Regards
Ctefeh

gsa2at Slammed & Awesome Dubber

97 posts · joined Apr 2009 ·

#705096
that vwar is amazing - thanks for the link
i would like a manual for this car - is the bentley the best one to get ???
jack the beetle rides again !!!

gsa2at Slammed & Awesome Dubber

97 posts · joined Apr 2009 ·

#705097


engine photo - will post one with cvs tomorrow
jack the beetle rides again !!!

pod i`ve got to finish this thing one day

4,980 posts · joined Dec 2003 ·

#705115
looks like its missing a vacuum line👎
Hey Sean ,did someone mention semi-auto😂 now where's Lee ❓😂😂😂😂😂
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook https://www.facebook.com/FlatFour

eraser Fahrvergnugen

970 posts · joined Mar 2005 ·

#705117
is that red hose even connected to anything?

But yes there should be a second hose going to the back of the vacuum unit.

Volksaddict Wolfsburg Wizard

533 posts · joined Dec 2004 ·

#705152
Bentleys is the best...$30-$50 on Ebay
Cheers&Beers
Ray V

ctefeh Wolfsburg Wizard

479 posts · joined Apr 2005 ·

#705154
GSa2at,
As Pod has rightfully pointed out you are missing a vacuum hose. Your power wire from the coil isn't fused either.
Spanky time for eraser for running said vacuum line direct from his inlet manifold😂 .
That CV connection only needs 5 In/Hg to be fully activated!

Paul,
Given it's a '68 as well, where is Lee?😂

Enjoy
Sean

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#705185
HI

I'm Here...

Here is a pic of My beetle... engine compartment...

1968 model... with 1971 air cleaner...

LEE

http://community.webshots.com/user/vw68autobug

3 attachments · Log in to view

- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#705186
I couldn't see My pics??

LEE

1 attachment · Log in to view

- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#705188
Anyone see My pics??


Not showing up here

LEE

3 attachments · Log in to view

- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#705192
68AutoBug wrote:Anyone see My pics??


Not showing up here

LEE

1 attachment · Log in to view

- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#705194
Thanks for that...

Been pulling My hair out trying to find the problem...

it does show how many times they are downloaded...

but no other info....

at all... thanks...

LEE
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

jedidan Officially Full-On Dubber

304 posts · joined Oct 2006 ·

#705213
LOL...pics r there......Lee and his technicolour dreamcoat...!

Hey gsa2at - is your car beige ? Savannah beige to be exact ?

The power to the coil being fused is a good point - mine isn't either - better fix that right now.
IF I'M GOING TO HELL, I'M GOING IN A VW BEETLE

My Family's Swiss VW Buggy Legacy --------> CLICK HERE

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#705220
57 oval wrote:yep showing on this end
Well, I still cannot see the pics...
but I only have My ignition fused under the bonnet..
maybe under the rear seat???? lol

with an auto beetle, best to renew all Vacuum hoses
including the small one...

use new good quality hose clamps..

then with the vacuum under control...

You can look for any other problems...

The majority of problems with the auto beetle can be fixed fairly easily...
these cars wern't really made to last this long...
but they do... they were all made in Germany too.

cheers

LEE

http://community.webshots.com/user/vw68autobug

3 attachments · Log in to view

- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

colonel mustard Son of Jim - Creator of Good

2,829 posts · joined Feb 2009 ·

#705222
jedidan wrote:LOL...pics r there......Lee and his technicolour dreamcoat...!

Hey gsa2at - is your car beige ? Savannah beige to be exact ?

The power to the coil being fused is a good point - mine isn't either - better fix that right now.

Dang it!! now i wish i had seen that musical last time it was in town...!!! grr. eh

Dan and Lee are Semi auto masters!!!!!!! Listen to them!!! 🙂

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 ·

#705225
Pods is the only one with the control valve small vac line hooked up right

gsa2at, yours is missing completley which is probably the source of all your problems and eraser ur carbs been swapped for a non ported one and someones tee'd it into the main vac line

obviously it works tho

and dan, yea thats good ol Savannah beige

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#705239
Yes Joel,
I had My small vacuum hose hooked up incorrectly for 3 years before I drilled out another port...

If this small hose is not connected to the carby, it takes 5+ seconds before the control valve can work.. this could be sort of fixed, by adjusting the control valve...

When I connected My hose to the correct port, I had to adjust the control valve to be Faster, as I had Way too much vacuum before....

cheers

LEE

Main problem with Autosticks - is mechanics who know nothing about them... it only takes a leaking hose to stop them working correctly... or a sucked in hose.... LEE

1 attachment · Log in to view

- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

eraser Fahrvergnugen

970 posts · joined Mar 2005 ·

#705247


here is my other one 😉

jedidan Officially Full-On Dubber

304 posts · joined Oct 2006 ·

#705265


and dan, yea thats good ol Savannah beige



I knew my car had a twin out there 😁
IF I'M GOING TO HELL, I'M GOING IN A VW BEETLE

My Family's Swiss VW Buggy Legacy --------> CLICK HERE

jedidan Officially Full-On Dubber

304 posts · joined Oct 2006 ·

#705270


Dan and Lee are Semi auto masters!!!!!!! Listen to them!!! 🙂



hey, Thanks c'ustard 😂 - two years ago i was in the same position as Gsa2at is now - bought my first semi-auto, and thanks to 'technicolour' Lee i am more in the know. You do learn about them very quickly and their unusual idiosyncrasies....still learning even now....😂
IF I'M GOING TO HELL, I'M GOING IN A VW BEETLE

My Family's Swiss VW Buggy Legacy --------> CLICK HERE

gsa2at Slammed & Awesome Dubber

97 posts · joined Apr 2009 ·

#705287
found the hose in question tucked away at the back of the engine bay
now when i move the stick there is a lurch of the car and a whistling airy sound from the back of the car
forward gears engage ok at rest - although clunks a fair bit
reverse is still grinding like hell
i think i will replace all the vac hoses anyone got the type and dimensions required - where do i get em ??
jack the beetle rides again !!!

Dudo Learner Dubber

7 posts · joined Feb 2009 ·

#705291
put a manual in him hahah
DAK DAK DAK

gsa2at Slammed & Awesome Dubber

97 posts · joined Apr 2009 ·

#705293
dudo you are trouble LOL
serious answers only please LOL
jack the beetle rides again !!!

jedidan Officially Full-On Dubber

304 posts · joined Oct 2006 ·

#705298
I used vacuum hose from supercheap - i just took a cutting from the old hose to make sure the I.D. is the same.
I also bought some new clamps too. So far my hoses have been great. Some of the softer hoses may collapse under
some of the stronger vacuum, so be careful - some of the other guys on this forum probably would recommend a higher
quality hose with metal reinforcement - but the cost of this stuff can be very prohibitive. In the first instance, use the cheaper stuff
to isolate the problem, then buy good quality stuff down the track when u have sourced a reliable supplier.

Also, that whistling sound may be a perforated bladder in ur vacuum servo. lie under the car and get someone to touch the gearshift
lever (with brakes on !) and see if the servo is doing its job of pushing the clutch linkage.

Yeah Dudo, watch what ur saying........I heard rumours that Lee will travel miles and miles to run people over with his semi-auto 😀
IF I'M GOING TO HELL, I'M GOING IN A VW BEETLE

My Family's Swiss VW Buggy Legacy --------> CLICK HERE

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 ·

#705301
jedidan wrote:Yeah Dudo, watch what ur saying........I heard rumours that Lee will travel miles and miles to run people over with his semi-auto 😀
well atleast he gets a brightly coloured view when hes underneath as the last thing he sees