what pushrod with a d/c master cylinder

cnfabo Custom Title Time!

1,353 posts · joined Apr 2008 · 30 Apr 2009, 10:59 pm

#709989

does anyone know if you have to change your pushrod when you install a dual master cylinder from the single circuit one.

maybe this explains why i couldnt bleed the front brakes when i installed a dual circuit master.

i have asked around but no one seems to know

hellbugged 48's and straight cuts

5,080 posts · joined Apr 2003 · 30 Apr 2009, 11:09 pm

#709994

no you don't......might need to adjust it to have correct "free play" tho

what condition are the front brake hoses in?

cnfabo Custom Title Time!

1,353 posts · joined Apr 2008 · 1 May 2009, 8:49 am

#710020

when we put the single circuit master back in we got them to bleed fine,so im assuming the hoses are fine but one of the circuits in the dual master was pooped for some reason,

how much free play at the pedal should i have???

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 1 May 2009, 10:07 am

#710032

No as long as it seats in the piston

I didnt on my Orange 65 car even the Oval push rod fits

As per Hellbug make sure you have the correct freeplay

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409