Skip to content
Aussieveedubbers

Staying on High Beam

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

mattie182 Wolfsburg Wizard

466 posts · joined Aug 2002 ·

#71066
Why wont the lights on the Type 3 nothc, go off highBeam???
Once you go flat, you never go back!!!!!!

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 ·

#71068
probabally welded the contacts closed
Futue te ipsum!!!

koolkarmakombi enkarmarising

2,078 posts · joined Jun 2003 ·

#71224
IF it is the same as a kombi, there is a relay that switches high to low beam under the fusebox. Not cheap to replace either. gets stuck in one setting as the plastic gizmo gets fried by high watt bulbs or old age. Can you hear a click when you flick the lever but stays on high?

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#73566
Silly question but are you flicking the dipper switch ???

More than likely the points in the switch or relay are welded shut...

replace them one by one till you solve theh problem.
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409