need to have a section where i can ask notch questions.
would ask that you notch fans keep an eye out so that i can get as much info as i can. this is my first.
neville is a '72.
1st question is does anyone recognise the rims on him. they are 15 in allows. and if you look close at the pattern it would seem its got the german cross in it... any ideas?
Simply Cruzin'...
and very importantly...
how do i lower this baby?????😀
and who has spares? in case i need to ask/acquire.:kiss
[Edited on 7/8/2003 by twoguns]
Simply Cruzin'...
The rear is as per the rear of a beetle etc
the front is the same concept but easier
i have rebooted my computer so i dont have the article on my computer anymore but somene will have it which gives you the EXACT method
cheers
adz
cant wait... am so keen to get going.
Simply Cruzin'...
wheels made by Ronal:thumb
Welcome to the Notchback brigade, great to see the enthusiasm!!
I myself was introduced to a '72 Notch and it soon became my first car.
I admit I have neglected it over the past few years. But it never forgot the times we had together, and when i came to liberate it from Dad's front lawn, it, JUST LIKE NEVILLE STARTED FIRST GO!!!
I believe they are a true evolution of the vw and are beautiful in their own right!
I'm looking forward to seeing more of neville, and will track his progess religiously
Rock on!
so were they an after market thing?
is there many getting around. i haven't seen them b4.
Simply Cruzin'...
They look damn nice...
i havent seen them before.....
I usally have spares around here....
Just let me know what your after and i can usally track it down if i dont have it.
Get onto Skewy or Type3kid for article about lowering you notch.
Enjoy!
:thumb
1962 Type3 Squareback
1967 Type3 Fastback "Kermit"
The truth is important. It will set you free
hey twoguns!
welcome to the type 3 world.
skewy still has the method of lowering. he has had trouble sending it. when he does if he doesn't send it to you i will. tazz gave me a 2 minute lesson at valla on lowering the front and it seems easy as.
as for spares i have 2 70's type 3's out the back and i'm always on the lookout for more spares or complete cars for parts. when you need something just ask someone will ahve it or know where to get it.
hope i was of some help.
cheers, kid :thumb
Not many Ronals getting around, they should look great when cleaned up, really go well with that colour, apparently they’re very light too.
yeah have tried a clean on the rims... they are a bit stained and look like they have been painted. so i will work out how far to go with them later.
type3kid i need a couple of minor things, like to front door trims in black, but will get onto you next week about it.
desperately need to know about the lowering of the front by sunday night. so i wiat eagerly for the info...
Simply Cruzin'...
common type 3 fans...
i need the info to lower my front end.....:bounce
Simply Cruzin'...
looks like i need a new passenger window channel. this one is ratted and therefor cant wind window. been told that would probably come with glass fitted.
am going to need two front door trims. black.
probably need front disc caliper/s.
rear engine lid in boot has no latches or insulation, would need bits or whole lid.
can any one help. please thanks.
and still details on lowering front.
[Edited on 10/8/2003 by twoguns]
Simply Cruzin'...
yeah i've got some door trims in black i won't be using. i'll get the pics of them and try post them. if i cant i'll email them. they are in pretty good nick
will be trying to straighten mine tues. (warped and crapped up a little from sittin all stuff in the notch). see how they go and wait for your pic/email.
any luck on the engine cover bits, anyone. dont have anything other than the bare skin.
Simply Cruzin'...
i finally got the lowering picture to post
i sent it to tazz to post up on here
TAAZZZZZZ WHERE ARES YA ?
SKewy Ivan😉
Hey twoguns
got a spare engine cover from a square. not in the best condition but pretty straight....if it helps
its not the actual cover, but more the accesories such as the lock nuts. hanging clip and insulation that i am after. mine is good except bare.
oh and i do need front door trims.
have been slack with the camera. neville is all back together and shined up a treat. will get pics. he runs turns and stops. next will be the tidy up of dints. etc.... after 'saint' aka WHTEMAN lowers the old boy an inch or two, while im away.
Simply Cruzin'...
Yeh yeh i'm here...... shish....
ok here is the pic
But i did Email it to 2G,
I should have the clips you want 2G, but not the one in the centre.
But i will have a lookie at the notch i'm getting saturday.:thumb
Anything esle???
[Edited on 12-8-2003 by Tazz]
1962 Type3 Squareback
1967 Type3 Fastback "Kermit"
The truth is important. It will set you free
yes thanks guys i got the lowering details. much appreciated.
Simply Cruzin'...
want the clips and stuff off my lid mate?
what a bunch of legends... thanks for the assistance guys.
type3kid. will need to catch up with you. as you are close.
Simply Cruzin'...
Steal my thunder KID!
😎😎😎:thumb
1962 Type3 Squareback
1967 Type3 Fastback "Kermit"
The truth is important. It will set you free
hey tazz ill be up to the gold coast around march... will catch up with you then if not b4. am sure you will have something i will need.
never been to QLD. looking forward to it.
Simply Cruzin'...
March?
sweet!
1962 Type3 Squareback
1967 Type3 Fastback "Kermit"
The truth is important. It will set you free
hey twoguns...no probs mate
tazz, you know i learnt from the best!😀 don't forget i'll be in qld in jan so you'll be meetin up with me and goin for a cruise!
:bounce cheeers Tazz !!:bounce
how's neville going twoguns?
Yeh zackly
1962 Type3 Squareback
1967 Type3 Fastback "Kermit"
The truth is important. It will set you free
been away for a week... but updates are up.
Simply Cruzin'...
