Alex Holzl 2332cc of pure BALLZ!!
1,550 posts · joined Jan 2004 ·
The time that i never thought would come...
Most of you already know the car but for thoughs who dont please check it out here at:
http://forums.aussieveedubbers.com/viewtopic.php?tid=38650&page=1
The car is all the same apart from the motor and the wheels. im going to list all the things i can think of but have alook over the build up post to see pictures.
*engineers cert ($450)
*long rego (11 months)
*New 1776 ($2800)
*16'' cookie cutter with new tyres ($1200)
*seem welded body and chassis
*Full cage
*All gauges for big motor
*perfect floor pan 68' (they were new thick pan halfs
*IRS (with 28mm torsion bars) ($300 for 28mm bars)
*poly bushes though out
*Adjustable front end
*Alfa Brembo front cailpers and porsche alloy hubs and rotors ($1400)
*Falcon rear disc brake setup ($1200)
*oil cooler up front
*copper lines and braided line up and back ($300 of fittings and lines dash 10)
*car ready for big motor
*drivers bucket seat
*Saas pas seat
special body spec:
*This car has late model brazilian small window doors with late door locks and latchs (the double latch doors)
*Has a 1500 beetle bonnet and front beaver panel. (not so pointy bonnet)
*late rear beaver panel. easier to get a big motor in and out.
Its an oval with out all the bits that arent safe!
The paint on the car is ok. it polishes up fantastic! but there is a couple of chips and some small reall fine cracks in the paint (not bog). The car still look fantastic all washed up.
This car has had lots and lots of time and money spent on it and is a perfect car for a hot motor. Its ready to go straight to the track. Ive had this car for over 6 years.
its a perfect start for someone who wants to get out on the track or hillclimbs and have the brakes and handling already to go hard.
looking for around $9500
The prices that i have put next to SOME of the parts in this car add up to around $7500! not including the rego and the actual oval! 🙁
Hope someone enjoys its as much as have!
Car is in sydney
Please call richard at V-force on 0408 991 247 or 9743 1247