Adaptor plate and fly wheel questions

Kimbo Officially Full-On Dubber

207 posts · joined Jan 2005 · 3 Jul 2009, 10:12 am

#722000

I'm currently running an old Nissan L20B in my race buggy, mated to a 2-lt Kombi box. I'm looking to replace this with an SR20 (non-turbo) and have a couple of questions:

1) Any idea where I can get an adaptor plate and rough costs ?

2) Will the fly wheel from the L20 (which has been modified for the Kombi bell housing and starter motor fit onto the SR20, or will I need to get another one made ?

Thanks in advance ... Kimbo

http://www.myspace.com/ksadelaide

gazman Seriously Crusin Dubber

101 posts · joined Jun 2007 · 3 Jul 2009, 1:37 pm

#722033

I think John Sherman at http://www.volksconversions.com.au/ does a SR20 adapter plate, not sure if you'll need the flywheel too...

The V6 Lowlight, see the build at - http://osp.metrohosting.info/kombiv6.html

pete wood 23 Windows of Awesome

6,828 posts · joined Jan 2004 · 3 Jul 2009, 1:50 pm

#722036

Unicap (aka Bill Croft) also makes them. if you use the same style of ring gear with the new motor you should be able to use your old starter setup.

Unicap
Bill Croft
34 Spinks Road
Llandilo, 2760
Phone: (02) 4777 4006
Fax: (02) 4777 4830
Email: billcroft@exemail.com.au
Speciality: Offroad, V8s, drag
ADL & ECU Dealer

"stoopid is stronger than axles"
http://drivingnotpolishing.blogspot.com.au/

Kimbo Officially Full-On Dubber

207 posts · joined Jan 2005 · 3 Jul 2009, 3:08 pm

#722044

Thanks guys, much aprpeciated.

Cheers ... Kimbo

http://www.myspace.com/ksadelaide