Skip to content
Aussieveedubbers

Making Beetles not drip oil everywhere

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

djnee Officially Full-On Dubber

341 posts · joined Mar 2009 ·

#727583
Slightly annoying...

Replaced the sump seal and one rocker gasket due to oil dripping on the driveway.

Cured it for a few days and now back to dripping of the hex nuts near the drain plug and the rocker cover again.

When i replaced them i was advised that a smear of oil to make the seal was enough, but now i'm convinced its not!

What do you guys use when replacing seals?

I don't mind a few drips but my driveway is starting to resemble some sort of modern art!

Also, do i have to buy more seals or can i reuse the one's i've recently replaced?

Ta
It May Never End

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#727585
do u have the blank nuts and copper washer on the six x 6mm oil cover studs ???
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

djnee Officially Full-On Dubber

341 posts · joined Mar 2009 ·

#727588
vw54 wrote:do u have the blank nuts and copper washer on the six x 6mm oil cover studs ???
deffo got the copper washer...not sure what "blank nuts" are?

I basically put on whatever came with the new sump seal.
It May Never End

1916baja Custom Title Time!

1,990 posts · joined Sep 2007 ·

#727638
Let the engine breathe... I put a breather box on mine and vented the tappet covers into the breather box using 1/4" hose and it did nothing, I then changed the hose and fittings to 1/2" and BAM! Didn't leak a drop for about 3 months until my breather box blocked up again. give it a go. It worked for me.

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 ·

#727643
unless u got bad blow by stock breather works well on a stock engine

all ive ever done with the rocker covers is glued the gasket to the rocker cover with sealant and make sure to oil the head to gasket side
if theres good tension on the bales they wont leak

djnee Officially Full-On Dubber

341 posts · joined Mar 2009 ·

#727735
helbus wrote:Also known as an acorn nut
The nuts that were there to begin with?
Yeah, they went on...with the washers
It May Never End

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#727747
does the stud stick through the nut ???

pull the genny stand off and wash out the breather as it may be blocked and not allowing the engine to vent pressure therefore causing oil leaks
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

djnee Officially Full-On Dubber

341 posts · joined Mar 2009 ·

#727777
Stud not sticking through the nut.

Pulling the genny / cleaning the breather.....is that easy to do?

The breather is behind the genny?

Any pics / info i can see?

Thx
It May Never End