Hi guys, I have some stuff for sale as i'm trying to get some more funds for the "make baja bigger" project 😂
Seller: Mick
Location: Mt gravatt Brisbane
Contact: 0439002870 or pm (i am on this site everyday)
Stuff i have....
Assorted weber jets and venturies, no mains. I dunno what sizes they are but i know they were too big for my 1916 with stock valves. $40... offers.---------SOLD
External oil cooler and filter adaptor, condition seems ok, few fins squashed but i have seen worse being used on bajas $15
Original oil bath filter, condition seems ok $15
30/31 pict carbie with manifold and new carbie re-built kit (was working fine when i pulled it off my 1835) $30 -SOLD
Buggy headlights Black $10 ------------SOLD
Brand new golf fuel guage sender suit 77ish $15
ramflo air filter, will fit carbie above $10 ------------SOLD
rubber distributor and coil covers, new $10-----------SOLD
15" splitty rim. looks to be 4 - 4.5" wide $15 ----------SOLD
I also have a pair of bay kombi front seats, they did not cost me anything because i got them from this forum. As i am a upholsterer by trade i am offering these seats only re-covered by me in whatever you want. I am only asking what it would cost to get them re-covered wich would be somewhere between $300-$400 let me know if you are interested.
I also have a ball joint beam disk to disk asking $200-offers.
-------SOLD
If you do not want any of the above items feel free to donate large sums of money to my baja anyway 😂
Thanks
Mick.
im interested in the buggy lights. are they 7inch? do you have a pic?
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
I do have a pic i just gotta figure out how to get them onto the computer... will get it up asap.
Are any of those Jets and Venturies for DCN/DCNF?
also interested in the external cooler and filter adaptor
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
Sorry all weber stuff is IDF. am trying to upload pics now.
pics
wheel been told it's rare... I dunno why.
Hi there Mick
I will grab the splity rim if i can.
I will call you tomorrow night.
Thanks Rick
:alien:alien:alien:alien:alien:alien:alien:alien:alien:alien
i will pass on the gear, thanks anyway dude
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
What size are the venturi's you have (presumably there's 4 of 'em) and what size IDF are they for ???
VWDCQ vice pres & web dude - vwdcqinc.org.au
Join a car club - get car peeps
My toys
'70 Hillclimb Bug 'Jezebel' w/- Haltech EFI -
http://bit.ly/VwTNtQ
'60 KG Coupe - resto kinda started
01 New Beetle - gf's car, but I turn the spanners
Splitty rim gone to "blue bus".
the jets i have are : the long ones there are f 16, the tiny little ones look to have 6c on them and the venturies have 32 stamped on them but they look like thay have been machined out. i measured the inside diameter and it read 36. I know nothing about webers as you have probably realised by now.
cheers Mick
oh and they were in 40 IDF's.
ill take the dizzy and coil covers!!! hehe bring em in next time your passing through mate😵💫
pete -
Custom Vee Dub
28 Hayward st stafford 33564356
I will take the the ramflow airfilter,PM sent cheers shane.
69 Beetle
66 Beetle
56 Beetle
No worries pete. Are you going to warwick? I can bring them then if you want? i might not be over that side of town before then thats all...
Actually i'm sure i will be 😀 what am i talking about.
bump
Hey mick
any chance of some pics of that beam setup?
thanks
chris
ozsurfer@hotmail.comWill get some on Friday. The beam is still attached to a floorpan out at a friends house where i work on my car. Its just a stock BJ beam with disk brakes attatched. complete.
cheers, mick.
G'day newbie vwer with 74 beetlle would i be able to use that beam /disk brake set up ? .mick plainlands.Keen if it works.0402492667.Thanks for your time.
The Crazy German
You know what?? I dunno! I know they used BJ fronts on 76 but i thought 74 was macpherson strut front end. But looking into it on the web i'm seeing BJ front ends.... I'm confused. Maybe ask the question in the tech talk section? Is it a superbug? If you look under the front of your car and you see 2 beams running across it's probably BJ. In this case you probably could use it. This beam will need a bit of work, Just a freshen up.. is there something wrong with yours?
Thanks for your reply,itsBJ,Just want to up date brakes,have drums,
The Crazy German
oh ok, Well i don't see why they wouldn't fit. I guess you could just replace it all from the trailing arms out. where abouts are you?
I'll grab the buggy headlights off you.
Can you take them to Warwick for me?
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
No worries Graham. We will be up there on saturday morning about 10ish.
See you then.
Mick.
pic of beam
No rust, just a little dirty and maybe a little surface rust. nothing that wont come off with a wire brush.
mick are those vents out of the carbs i got off you?? if so whats vents are in them now??
There are three types of people in this world - people who can count and people who can't....
yeah they are, I think they are 32's now but i can't be certain.
bump
