Skip to content
Aussieveedubbers

WTB: Carb linkage kit (type 3 twin for type 1) + Engine Tinware

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

bajachris88 The international telephone dialing code for Antarctica is 6

6,661 posts · joined Apr 2005 ·

#736148
I have type 3 twin carbs and manifolds. I'm after some form of linkage kit that will take a type 1 accelerator cable and run these type 3 carbs.

Any got any? any idea where to get?

And am after 1600 twin port engine tin. the stuff that covers the barrels/cylinders. Not hte fan shroud.

Thanks,
Chris.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!

grumble Son of Jim - Creator of Good

2,672 posts · joined Jun 2008 ·

#736153
I used to run a shortened type 3 pivot in conjunction with modified linkages in my old oval,I lifted the carbies up by using about 3 FC holden carbie spacers,this gave me clearance and also allowed the fitment of air filters.