Well I have had an old '58 beetle for about 10 years now just gathering dust in the old shed so I thought in tradition of all the custom car shows I might throw it on bags.
Now this looked easier than first anticipated, however I am starting to get my head around it all. Seeing I haven't seen any posts on this I would start a little build thread of my own.
Here is the pan getting the back end ready for the rear bags.
how hard is it too bag want to do it to my 61 and i herd that you need to bring the front beam in 2.5 inches on each side to make it sit flat and lift the motor 1inch
Have ordered 6mm steel and bar for rear arms (Did not have enough at home), front beam steel has been ordered (4 inch narrower) and front bags should be here from US in two to 3 days.
Pics will come soon once there is some more progress. I will have templates for all brackets on CAD as they are being laser cut this week.
