Hey Guys,
For my Beetle im after:
A King & Link Adjustable Beam, or if I have no luck with that Ill settle just on a standard King & Link Beam and get someone to weld the adjusters in for me.
Im also looking for a turbo header which keeps the turbo down low preferably below the tinwear.
Im hoping to not spend too much but ill see whats out there.
Im located in Kirrawee, NSW
Thanks
Mike
Mike, Turbo headers are a work of art to get right and vary on the width of your engine. Best to build your own.
Also there are a few issues mounting it low like oil drain, mufflers and air cleaners, Heat and fitting it in there.
I would say it you are mounting it down low you will be injecting it and if your going to all that trouble and $$$$ do it properly.
If you want budget, Check out stanleys on the drag part of this forum. Goes good, looks right and costs less.
Good Luck,
T54
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
