How hard is it to change brushes in an alternator??
Now my gen / alt light comes on every now and then
Bizarre Moderator The artist formerly known as blue74l
12,787 posts · joined Aug 2002 ·
Futue te ipsum!!!
Alternators
HappyDaze Superannuated
2,887 posts · joined Jun 2009 ·
Are you really an artist? If so, perhaps you should find a better place to keep your brushes than in an alternator!
Cheers, Greg
Cheers, Greg
I'd rather wear a Beetle out by racing it than by polishing it!
lauzboy Seriously Crusin Dubber
177 posts · joined Mar 2005 ·
I was having an alternator issue earlier this year. Battery going flat (brand new), light coming on intermittently etc.
If you remove the black plastic housing (has the D and B terminals) you will see the 2 brushes. I spent ages looking around and you cant just buy a replacement brush assembly (ie brushes and plastic housing). I ended up going to an auto electrician who gave me some Bosch brushes. I then desoldered the old brushes (worn down by about 7mm) and then soldered in the new ones. Pain in the ass for what should be a $10 part.
I still get the alternator light come on intermittently every now and again but havent had a flat battery since. I think the regulator is nearly dead but you cant get to that without removing the alternator in which case i might as well replace the whole thing ($120-ish from Classic VW)
hope that helps
If you remove the black plastic housing (has the D and B terminals) you will see the 2 brushes. I spent ages looking around and you cant just buy a replacement brush assembly (ie brushes and plastic housing). I ended up going to an auto electrician who gave me some Bosch brushes. I then desoldered the old brushes (worn down by about 7mm) and then soldered in the new ones. Pain in the ass for what should be a $10 part.
I still get the alternator light come on intermittently every now and again but havent had a flat battery since. I think the regulator is nearly dead but you cant get to that without removing the alternator in which case i might as well replace the whole thing ($120-ish from Classic VW)
hope that helps
pod i`ve got to finish this thing one day
4,980 posts · joined Dec 2003 ·
depends on the make of the alternator ,as some have the unscrew and replace like a normal one,well one i have is ,havent looked at the cheaper chinese one yet....
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook https://www.facebook.com/FlatFour
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook https://www.facebook.com/FlatFour
1303Steve Scirocco Rare
8,650 posts · joined Aug 2002 ·
Hi
An old trick on the alternator is to bend the metal bit that the brush is soldered to so that the brushes poke out further. You can tell if they haven't been touching properly, they look a bit dull on the rubbing surface.
You could most likely adapt an external reg to the internal reg models.
Steve
An old trick on the alternator is to bend the metal bit that the brush is soldered to so that the brushes poke out further. You can tell if they haven't been touching properly, they look a bit dull on the rubbing surface.
You could most likely adapt an external reg to the internal reg models.
Steve
68AutoBug Beetle Restorer - Experience over 138\% - YIKES --
11,654 posts · joined Aug 2002 ·
Hilauzboy wrote:I was having an alternator issue earlier this year. Battery going flat (brand new), light coming on intermittently etc.
If you remove the black plastic housing (has the D and B terminals) you will see the 2 brushes. I spent ages looking around and you cant just buy a replacement brush assembly (ie brushes and plastic housing). I ended up going to an auto electrician who gave me some Bosch brushes. I then desoldered the old brushes (worn down by about 7mm) and then soldered in the new ones. Pain in the ass for what should be a $10 part.
hope that helps
have you seen the new brush assemblies on ebay USA...
a few different ones are usually on there..
look up BOSCH brushes >??
its a wonder they aren't available from VW shops in Aust.??
maybe too expensive..??
cheers
LEE
1 attachment · Log in to view
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---
71-BEETLE-SEDAN AKA Josh
1,058 posts · joined Mar 2009 ·
Another trick is to turn the brushs around, like if they are curved a bit turn em round and should get bit more like out of em