maybe its all in your head(s)

rocknrob Insano Dub Head

844 posts · joined Dec 2003 · 7 Nov 2009, 4:51 pm

#745923

EJ22

[/img]

[/img]

EJ20T

[/img]

[/img]

exhaust port similar story...about 35mm versus around 40mm...heheh couldn't be bothered lying in the dirt to take a pic...anyway pics say it all👍

seagull Compulsive Aussie Vee Dubber

4,979 posts · joined Dec 2003 · 8 Nov 2009, 1:38 am

#746013

keep it clean man & were is the steel cap boots ?

also what motor did you end up picking up & what was the turbo ?

Looking for that special lady : PM me for coffee & cake

rocknrob Insano Dub Head

844 posts · joined Dec 2003 · 8 Nov 2009, 4:41 pm

#746116

Hi Neil..got a 98 forester gt obviously boost friendly but only comes with a tiny TF035...my TD04 will be going on to start with. One neat thing that came with it is this alloy header tank...much better than the plastic falcon one i'm using👍

[/img]

seagull Compulsive Aussie Vee Dubber

4,979 posts · joined Dec 2003 · 9 Nov 2009, 12:38 am

#746223

The TF035 is a wast of time and more suited to one of the air cooled guys so move it on. In a heavy bus the TD04 is better suited , or go for a VF34 for a blast as you have yellow 440 cc injectors you on a winner. Yep those tanks are the best you can get

Looking for that special lady : PM me for coffee & cake

ElusiveStranger Officially Full-On Dubber

330 posts · joined May 2006 · 24 Nov 2009, 10:39 am

#748877

Can I semi hijack on here please? Ta 😉

Anyone know if EJ20 Nat Asp and EJ20 Turbo exhaust ports are the same?
I'm wondering if I can fit a aftermarket Turbo header onto my Nat Asp EJ20.

Cheers

rocknrob Insano Dub Head

844 posts · joined Dec 2003 · 24 Nov 2009, 11:54 am

#748896

I would say yes👍 I just swapped over my homemade headers from the EJ22 to the EJ20T the inlet manifolds are a different story tho

ElusiveStranger Officially Full-On Dubber

330 posts · joined May 2006 · 24 Nov 2009, 7:52 pm

#748990

Thanks Rob, nice to have it confirmed

seagull Compulsive Aussie Vee Dubber

4,979 posts · joined Dec 2003 · 24 Nov 2009, 10:52 pm

#749031

ElusiveStranger wrote:Can I semi hijack on here please? Ta 😉

Anyone know if EJ20 Nat Asp and EJ20 Turbo exhaust ports are the same?
I'm wondering if I can fit a aftermarket Turbo header onto my Nat Asp EJ20.

Cheers

If your ej20 n/a motor is a quad cam. Your block will be a closed deck case c/w oil squirters like the early wrx turbo motors of that year. Its a good case with very poor pistons & rods , however swap them out and fit turbo heads , rods & pistions and you have a very good motor

Looking for that special lady : PM me for coffee & cake

ElusiveStranger Officially Full-On Dubber

330 posts · joined May 2006 · 25 Nov 2009, 1:49 am

#749047

Thanks Seagull but mine's a SOHC