Hey, I have searched, nada.
What do you guys use to align clutch plates pre
pressure plate install.
Dave.
ahoogah Seriously Crusin Dubber
135 posts · joined Oct 2009 ·
clutch alignment tool
grumble Son of Jim - Creator of Good
2,672 posts · joined Jun 2008 ·
In the trade we mostly use a multi purpose spigot tool,this comes with various sleeves & spigot sizes.sometimes we have a one off machined up to sizes to suit the application.I hope this puts a little light on the subject Cheers Les
Joel Now containing 100\% E-Wang
9,368 posts · joined Feb 2006 ·
you cant beat an actual input shaft
just find a dead vw gearbox 👍
just find a dead vw gearbox 👍
h fractals - an ever changing lifestyle
7,671 posts · joined Feb 2005 ·
cha ching! never fails that oneJoel wrote:you cant beat an actual input shaft
just find a dead vw gearbox 👍
fractal geometry; the inner most limits of mind altering abuse
Fantasy http://seventhchronicle.com
Z = Z2 + C1/r = 1/0 = infinity
Barrels www.barrelman.com.au
VW Workshop - aircooledgarage.com.au
allcooled.com.au
Fantasy http://seventhchronicle.com
Z = Z2 + C1/r = 1/0 = infinity
Barrels www.barrelman.com.au
VW Workshop - aircooledgarage.com.au
allcooled.com.au
Baja Wes V6 Baja Pioneer
3,119 posts · joined Aug 2002 ·
yeah, I just use an input shaft.
Wes - www.offroadvw.net - 200HP Quad Cam V6 in a VW Baja - with climate control... 🙂
www.taylorcycles.com.au - My DH MTB racing brothers shop.
www.taylorcycles.com.au - My DH MTB racing brothers shop.
ElusiveStranger Officially Full-On Dubber
330 posts · joined May 2006 ·
An extension bar from your socket set wrapped with tape to the correct thickness can work nicely
GeorgeL Officially Full-On Dubber
231 posts · joined Feb 2006 ·
I don't know if they are as common for you as they are in the US, but a AA-cell Mag-Light flashlight...umm...torch is a perfect fit. for the spline and the recess in the flywheel. Works better than the "official" tool because it doesn't disturb the grease on the bushing while aligning the clutch