well this is what i`m giving up my baja for
a 1973 window van,1600 motor ,came with the obligatory huntsman since dispatched to his maker with the help of some surface spray
she looks a bit rough but is fairly solid
the most bit of rust found so far
bad repair jobs
oh and this come in the deal as well
a good parts car 2 litre 1976 model ,roof is good but right side is a bit dented, rust under front window and in places around it
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourparts car?? you serious.... bays that are not campers are getting to rare to make them parts cars....(everyone loves a camper, except me!!!) Nice purchases there.
so whats the plans for them? 2 into 1? resto?
well motor and box are coming out to repower a sick dub ,rear tailgate is going on the blue one as well as lights etc ,it has no seats but plated 8 seater ,but funnily it has a qld mod plate to make it a 2 seater,the front floor is buggered ,as well as both steps,and the windscreen is going into the blue one and maybe some other bits,but yeah making one good one and giving life to others
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourstarted washing blue one with a scourer pad ,has a green colour underneath,so might hit it with the gurney and sandpaper to bring it back to og colours then colour match to that,i just want a driving bus to hell with the dents👍😁
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourwell people should not be let out to play with bog and fibreglass.i knew the passenger side step was dodgy but this dodgy and where the hole is in the floor had fibreglass underneath. new parts are on there way👍
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourKombi's rock!
I wouldn't mind one, one day.
i would live in it.
So wats the plan Paul? Rat? full resto? Pimp mobile? Ghetto cruiser? :P 👍
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
its been a while but been busy doing other stuff ,but to answer your question Chris ,get it roadworthy and drive it so far.. had a bit of time today before the thunderstorm to get a little done on my windscreen repair
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourHey Pod, nice to see some new buses in the club.
tinman wrote:Hey Pod, nice to see some new buses in the club.
yeah we have plenty now,even one i didnt know about till i seen some old bar photos
🤪meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourLook like some fun with the buses good luck see you soon on the road or at a show
A wave a day keeps the doctor away especially in a VW 😎:
well did some more after work last couple of days
ground welds and put some filler on for smoothing out
had to fix a bit up the top of the window ,saw some bubbles on the roof corner,hit them with the grinder and ended up with 2 5cent peice holes.Go with grinder in hand to junk bus and presto new bit of roof and windscreen edge,now welded in ready for a clean up and smooth out,but how do i get the lichen back on the repair,i suppose only time will fix that
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFour4 hours work this arvo ,still a little more to weld on it but the step and floor repair are underway
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourWhoa....that new step looks a bit safer than the old piece of 'mesh' that was there!
Good job mate!
Scarab (aka: Paul)
gotta love a good rust repair panel. Lookin good!
Excellent rust repair work!
Might have to leave my kombi round at your place for a while and it might have a few less holes in it.
Well done. Great to another one being saved.
Cheers,
Scott
88 Caravelle Syncro Camper
89 Caravelle GL microbus - 5 speed
69 Microbus
05 Mk5 Golf 1.9 TDi DSG
Lots a hard woek ahead but will be well worth it at the end
a few more pics
step and floor repair
the dogs leg ,gap is not good but its all steel
front just needs the crows feet taking off and some fresh paint ,dents and all ,as not looking for a show stopper ,just a bit ratty will do😀
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourwell summer holidays have been busy re-ringing the motor ,changing the gearbox from 1600 to an 1800 one and doing a bit of de-boging where it was already falling out
and here is it running,sounds a bit tappety but have to check them over again
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourlooking good mate
👍👍😂🙅🥷😬🤓
wheels are now on ,looks like easter will be a busy time, a bit of grinding, welding and puttying then sanding ,and maybe some painting🙂
and if you are wondering what happened to the white one
its off to kombi heaven ,and has made a few buses keep going for longer
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourGood stuff Pod
That has turned into a decent solid van
Damn - I wish i could weld 🙁
Futue te ipsum!!!
