WTD-Swing axle spring plates -SORTED

psimitar Son of Jim - Creator of Good

2,506 posts · joined Jan 2009 · 15 Dec 2009, 10:42 am

#752517

Hiya,

After a pair of swing axle spring plates for a Beetle. 78mm inner and 75mm outer bushing sizes would be preferred but whatever you may have 🙂

Cheers,
Mike

Brissy would be more handy too 🙂

madness is in the eye of the beholder 👍

polak Everything is alright with enough Vodka :P

913 posts · joined May 2009 · 15 Dec 2009, 1:02 pm

#752538

psimitar wrote:Hiya,

After a pair of swing axle spring plates for a Beetle. 78mm inner and 75mm outer bushing sizes would be preferred but whatever you may have 🙂

Cheers,
Mike

Brissy would be more handy too 🙂

hi, not sure on the measurements, but as far as i know all swing axles had the same size bushes, they had different style of bushes (ie one was round and others had 4 tabs coming off them) and ovals had thicker spring plates with bigger torsion bars, but all spring plates were still interchangeable. I have the original spring plates, caps and torsion bars that came out of my 1967 swing axle beetle, if you are interested PM me.... cheers adam

VW - helping put oil back into the ground for over 60 years

psimitar Son of Jim - Creator of Good

2,506 posts · joined Jan 2009 · 15 Dec 2009, 4:14 pm

#752565

Ok, I'm a bit of a dumb arse. I just re-checked my modded spring plates and they can still be used. So no need for new ones.

Thanks though 🙂

madness is in the eye of the beholder 👍