I started converting my Kombi a couple of years ago but ran out of motivation due to work giving me a vehicle and fuel card. Guess my account got deleted from here too due to inactivity. I got most of the way through things before actually pulling the Kombi apart, so I have the following:
EJ25 bought through these forums a couple of years ago. IIRC it had done about 70k, from and 01 liberty or something. I paid 1800 for it back then, since it was supposed to be good. It is just sitting on a trolley so unfortunately I can't demo it or anything.
I have already gone through the wiring harness and removed the extraneous wiring and labeled the remaining wires. The ECU is of course included.
Adaptor plate and flywheel from seagull, paid 600 for them back then.
Fuel pump, barbs on both ends
I welded up an exhaust for the EJ25 based on the original headers which would basically route the same way the VW exhaust does, around the back - this is only mostly complete since my plan was to see how well it fit in the back before continuing further. There is a silencer as well you can use if you like.
I have the full subaru manuals on CD somewhere too if I can find them.
So basically the main items left you need to fiinish this off would be some radiators, engine mounts, and I guess finishing off the exhaust.
All this gear has just been sitting in my shed so it shouldn't be any worse for wear.
My price is $1200 for the lot. I would prefer not to separate anything.
I am located in Bassendean WA.
-Zig
Dent Learner Dubber
7 posts · joined Apr 2009 ·
