Hi Guys,
Came across a floor pan with a crossed thread on one of the frame horns (ie the big bolts under the bell housing).
Are these straight forward to replace. I have donor parts.
Cheers
Newt
It is as it is - If you didnt enjoy today, you've missed the opportunity.
Short answer...NO
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Any chance of buying a thread tap and re-tapping the thread?
if its just the first few threads that are damaged it will clean up with a tap and still provide enough purchase, as the bolts are quite long.
good luck
drill out the rest of the threads and put 4 nuts and bolts through. weld the nuts to the back of frame horn and volla!
maybe??
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Hi
I got one to clean up pretty well with a tap.
Steve
Cheers guys, let you know it pans out.
Newt
It is as it is - If you didnt enjoy today, you've missed the opportunity.
