Skip to content
Aussieveedubbers

dizzy not advancing

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

bugzla Custom Title Time!

1,164 posts · joined Jun 2007 ·

#761706
have a 009 that isnt advancing what can i do has any one fixed this problem if so any help would be great if i can fix it with out buying a new one would be very happy

bugzla Custom Title Time!

1,164 posts · joined Jun 2007 ·

#761730
bump

alien8 Wolfsburg Wizard

521 posts · joined Sep 2008 ·

#761733
It could be the spring has broken or fallen off.
Take off the cap,take out the points or module,undo the two screws that hold the plate in and remove the plate. There should be a spring that operates the advance. If its broken replace it or reconnect it if it has fallen off.

bugzla Custom Title Time!

1,164 posts · joined Jun 2007 ·

#761742
found it shaft was siezed freed it up and wosh ga ................. all i needed was a push thank u alien8 i knew it but couldnt think straight lol

alien8 Wolfsburg Wizard

521 posts · joined Sep 2008 ·

#761752
Glad you got it sorted mate👍
and it did not cost anything

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#761761
Like everything that moves.... mechanically

it needs to be lubricated at every oil change....

standard practice...

Lee
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

bugzla Custom Title Time!

1,164 posts · joined Jun 2007 ·

#761772
it was only that the dizzy at been sitting around for such a long time not used LEE not through bad servicing 🙂............ we only found the problem with it when i put into another motor

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#761800
OK No worries...

Lee
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---