Seller - Angus
Wynnum/Manly Qld, 4178
Item Description - see below
Condition – NOS
Item Cost - see below
Contact here or 0412 105 789
Some left over bits no longer required, all NOS;
25/36 HP Karl Schmidt main bearings, U4. 2 sets $30 ea or $50 for both
25/36 HP Karl Scmidt big-ends $25 ea or $40 for both sets
25/36 HP tappet covers - $30 pair
GHE accessory under-dash ashtray, see photos. Was going to fit to my ghia but have changed my mind - $100
Bearings sold pending, ashtray and tappet covers still available. Offers?
how different to a beetle is the tray
or will it fit a beetle pls Angus, any pic ?
bernie
want any vw bits old but like me, Made in Germany!!!
Bernie
the (bad) photos above are of the ashtray. I'll try to take some better ones. I don't see why it shouldn't fit a beetle, those four holes you see from the top are for the monting screws. You just need a flat section underdash to mount it. Size is 100mm wide x 120mm deep x height 30mm. The actual chrome front is about 40mm high, it has a handle to pull out the tray.
I'll try it out in my '67 beetle in daylight.
Angus
Bernie
Here is another photo. I tried it in my '67 beetle, and it can be fitted under the glovebox, but it pokes out a few mm. OK but it fits under a ghia dash better.
oh dear; I read 'under dash tray' !!!
sorry man but someone will see it now and hopefully buy it.
want any vw bits old but like me, Made in Germany!!!
Bernie
You should always read the fine print.......