48 IDA Linkage...Which One?

BeetleJuice Officially Full-On Dubber

350 posts · joined Sep 2006 · 31 Mar 2010, 3:38 pm

#770965

In my 68 street Beetle,I have on my engine 48 IDA's on short manifolds GB587, small fan housing and a Berg Breather GB 207B.

Was using a centre pull linkage but I have a new large dizzy and the linkage no longer fits.
In the Berg manual they recommend a GB 451 for use with my Berg accessories. Does anyone know if the GB 455 will fit my application with the above Berg accessories?

Not sure if I see value in the Berg ones...But maybe I have to bite the bullit
Does anyone know if any other linkage will work with the Berg accessories I have?

If you have one, I may in the market to purchase.

Regards

Craig

FringeDweller

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 31 Mar 2010, 6:04 pm

#770982

so you have an engine ?😉

BeetleJuice Officially Full-On Dubber

350 posts · joined Sep 2006 · 31 Mar 2010, 6:17 pm

#770988

Craig Torrens wrote:so you have an engine ?😉

Yeh. I won't say how long I've had it here on the grounds it will incriminate me.....Slacko😂

Got a bit to do....I reckon it'll be back on the road in the year 2015.🤪

So Craig,How is your knowledge on linkages? Have you got anything that'll fit?

FringeDweller

Gracey Wolfsburg Wizard

511 posts · joined Feb 2003 · 31 Mar 2010, 8:18 pm

#771007

I'm using the CSP centre pull linkage with a rather large dissy and it just fits.

Personally I think this is the best linkage I've ever used, however I'm using IDF's on tall manifolds.

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 · 31 Mar 2010, 8:30 pm

#771010

Yep thats the one Craig, GB 451 fits the IDA's on those manifolds. Fitted one recently, usual Berg quality. I prefer Berg linkages, always good quality and real nice light throttle feel, and you get the carb arms with Berg, that's important as they are often worn on the shaft flats. I don't think any others come with arms.

Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

BeetleJuice Officially Full-On Dubber

350 posts · joined Sep 2006 · 31 Mar 2010, 10:11 pm

#771035

matberry wrote:Yep thats the one Craig, GB 451 fits the IDA's on those manifolds. Fitted one recently, usual Berg quality. I prefer Berg linkages, always good quality and real nice light throttle feel, and you get the carb arms with Berg, that's important as they are often worn on the shaft flats. I don't think any others come with arms.

HI Matt

What about carb sync and vibration? I've seen on other forums some have experienced this.
Would you have a good one lying around? With the amount of miles my car has done in the past 10yrs, I don't think I will need any replacement carb arms just yet!😂

FringeDweller

BeetleJuice Officially Full-On Dubber

350 posts · joined Sep 2006 · 31 Mar 2010, 10:14 pm

#771036

Gracey wrote:I'm using the CSP centre pull linkage with a rather large dissy and it just fits.

Personally I think this is the best linkage I've ever used, however I'm using IDF's on tall manifolds.

HI Gracey

What size IDF's are you using? The 48IDA is probably wider at the base than all other Weber & Dellorto, so I wonder if the CSP will fit mine??
Is there a chance you could get a pic?

FringeDweller

Gracey Wolfsburg Wizard

511 posts · joined Feb 2003 · 1 Apr 2010, 5:57 pm

#771127

Hi Craig,

I'm using 44 IDF's and your right the IDA's are wider then the IDF's.

Are you using straight manifolds or offset manifolds?

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 · 1 Apr 2010, 9:14 pm

#771168

BeetleJuice wrote:
matberry wrote:Yep thats the one Craig, GB 451 fits the IDA's on those manifolds. Fitted one recently, usual Berg quality. I prefer Berg linkages, always good quality and real nice light throttle feel, and you get the carb arms with Berg, that's important as they are often worn on the shaft flats. I don't think any others come with arms.
HI Matt

What about carb sync and vibration? I've seen on other forums some have experienced this.
Would you have a good one lying around? With the amount of miles my car has done in the past 10yrs, I don't think I will need any replacement carb arms just yet!😂

In the many years of using them, I've only ever had sync issues when caused by fan housing issues, normally from aaxle tramp or cheapo alt straps or something similiar. They certainly last forever, but are heavy.

Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE