where to get one in sydney?
im talking about a complete harness fr a 71 KG from front bumper to rear
rickp Officially Full-On Dubber
200 posts · joined Apr 2010 ·
wiring harness
rickp Officially Full-On Dubber
200 posts · joined Apr 2010 ·
please delete... posted this in the wrong section
barls Administrator Causer of Chaos and Mayhem
9,473 posts · joined Jun 2004 ·
which section did you want it in?
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
the chaos project - click me
willtrack Officially Full-On Dubber
204 posts · joined Nov 2009 ·
PM sentrickp wrote:where to get one in sydney?
im talking about a complete harness fr a 71 KG from front bumper to rear
bajachris88 The international telephone dialing code for Antarctica is 6
6,661 posts · joined Apr 2005 ·
If you find a supplier feel free to put up here, i'm keen on complete wiring hardness for the 69' bug and can only find US suppliers thus far.
👍 🙂 cheers,
chris.
👍 🙂 cheers,
chris.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
68AutoBug Beetle Restorer - Experience over 138\% - YIKES --
11,654 posts · joined Aug 2002 ·
Hirickp wrote:where to get one in sydney?
im talking about a complete harness fr a 71 KG from front bumper to rear
If Vintage Vee Dub in Sydney don't have one...
it means there won't be any in Australia...
only a few Karmann Ghias were sold in Australia in 1959 1960
so, You would be lucky to get a tail lamp lens in Australia
The USA ones are wired differently to the European type We had... even in beetles...
and the steering wheel fuse box etc all in the wrong places..
They are also Very expensive..
If You can get it done Yourself...
simplest way is to run a 5 and a 7 trailer cable from the front to the rear... plus a couple of 30 amp wires from the battery to the dash....
cheers
LEE
-
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---
bajachris88 The international telephone dialing code for Antarctica is 6
6,661 posts · joined Apr 2005 ·
Hmm, thanks Lee, although it wasn't directly for me and not my thread lol, that does help me too.
I still have the original harness, will just make one. I'm doing it now for the celica as we speak (another story). i will bite the bullet and do it.
I spose if i was to make one, while i'm doing it, i could make a couple at the same time, seeing if i even sell them for 2/3'rds the average market price, i still get a few biccies out of it. 👍
wiring seems to be my forte...
I still have the original harness, will just make one. I'm doing it now for the celica as we speak (another story). i will bite the bullet and do it.
I spose if i was to make one, while i'm doing it, i could make a couple at the same time, seeing if i even sell them for 2/3'rds the average market price, i still get a few biccies out of it. 👍
wiring seems to be my forte...
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!