as it turns out mine stops at 150, rear axle nut needs 220ish apparently, anyone got one i could borrow for a lil bit when its got wheels on the ground again?
Volkswagen Drivers Club of Queensland - member 🙂
STIDUB - yep its still a work in progress
Vwdcq club car racing/ and crashing while my bug isn't finished.
The above are personal views, no more, no less
i know this sounds like a butchers job, but most people i know use a long bar on the socket and haul down as much as you can it never failed me and i have been doing back yard job forever
👍👍😂🙅🥷😬🤓
same here,
its swingers that are more critical for correct torque,
your weight on a breaker bar with a bit of pipe should be all you need to get it right
i think a standard 36 mm spanner is about 1 1/2 foot long so if you get some who weights about 80kg to stand on it you will get close to 220 ft/lbs
1970 bug /1500 stock as a rock.
1976 standard bug ready to be modified 😁😁😁😁😁
I might be able to.. but not for a while... i will finf out, but dont count on it.. sorry.
Hi Dave
I have a 3/4 one I bought at 2nd hand store for $80.00, its a Warren & Brown.
I use it all the time on axle nuts, flywheels etc. You would be surprised how little effort is needed to achieve the correct torque.
Meaning that jumping up and down on a water pipe is probably tightening them too much.
A man of your talents should be able to make up and an extension/multiplier for your existing torque wrench that would double its output.
Steve
awwww thanks steve 😍 all good think i have it sorted out now, cant do it with the car in the air without axles etc either, 150 will do for now just dont let me forget later on 😂
Volkswagen Drivers Club of Queensland - member 🙂
STIDUB - yep its still a work in progress
Vwdcq club car racing/ and crashing while my bug isn't finished.
The above are personal views, no more, no less
so are you going to do every thing else up to its correct torque or just the axle nuts
🤪😂🤪😂🤪
STIDUB wrote:awwww thanks steve 😍 all good think i have it sorted out now, cant do it with the car in the air without axles etc either, 150 will do for now just dont let me forget later on 😂
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲
yeah i figured everything should be about that tight, especially the caliper bolts that say 28Nm's 😂
Volkswagen Drivers Club of Queensland - member 🙂
STIDUB - yep its still a work in progress
Vwdcq club car racing/ and crashing while my bug isn't finished.
The above are personal views, no more, no less
do you ever go to sleep!
I have a 3/4 drive torque wrench that goes to something crazy high like 410 ft/lb, and of course a 36mm socket to suit.
You can borrow if you like when you bring my tie rods around.
😉
VWDCQ vice pres & web dude - vwdcqinc.org.au
Join a car club - get car peeps
My toys
'70 Hillclimb Bug 'Jezebel' w/- Haltech EFI -
http://bit.ly/VwTNtQ
'60 KG Coupe - resto kinda started
01 New Beetle - gf's car, but I turn the spanners
sides, awesome 😀
mustard, yeah about 4-6hrs a night, then the one day off a week i sleep pretty much alllllll day, great fun 😂
Volkswagen Drivers Club of Queensland - member 🙂
STIDUB - yep its still a work in progress
Vwdcq club car racing/ and crashing while my bug isn't finished.
The above are personal views, no more, no less
More bolts, studs etc. fail because of over-tightening than under-tightening.
However, those rear axle nuts need to be (to use a technical term) "bloody tight", and kept that way, particularly on swing-axles!
Let them get loose and the splines will chew out quick-smart - meaning new drums. Late model axle nuts are a good move, too.
Cheers, Greg
I'd rather wear a Beetle out by racing it than by polishing it!
HappyDaze wrote:Let them get loose and the splines will chew out quick-smart
yeah, like gunna's... saw his at DB's place... mannnnnnnn. thats scary.
So you don't have to fork out for the torque wrench just weigh yourself and convert into pounds. Now divide 220 by your weight and this is how far, in feet, you need to stand on the bar from the socket to get the correct torque. 😎
madness is in the eye of the beholder 👍
or, go to sides, say gimmie money then steal his 👍 thanks dave 😀
Volkswagen Drivers Club of Queensland - member 🙂
STIDUB - yep its still a work in progress
Vwdcq club car racing/ and crashing while my bug isn't finished.
The above are personal views, no more, no less
Yah, no probs dude. I still want me a drive of the Tiguan tho ya know...
😉
VWDCQ vice pres & web dude - vwdcqinc.org.au
Join a car club - get car peeps
My toys
'70 Hillclimb Bug 'Jezebel' w/- Haltech EFI -
http://bit.ly/VwTNtQ
'60 KG Coupe - resto kinda started
01 New Beetle - gf's car, but I turn the spanners
aye, that works too. i can 'borrow' the 1 inch drive from work 🙂
madness is in the eye of the beholder 👍
when you give me jezi 😂 careful though, you may become a boost junkie, drive once its got a few k's on it & boooooossssttt (it sneezed earlier! first time i actually heard it, damn sound deadening)
Volkswagen Drivers Club of Queensland - member 🙂
STIDUB - yep its still a work in progress
Vwdcq club car racing/ and crashing while my bug isn't finished.
The above are personal views, no more, no less
Nah, see like I keep trying to explain... a drive of someone's daily is COMPLETELY different than a drive of someone's race car.
Bring on the Amarok !!!
😀
VWDCQ vice pres & web dude - vwdcqinc.org.au
Join a car club - get car peeps
My toys
'70 Hillclimb Bug 'Jezebel' w/- Haltech EFI -
http://bit.ly/VwTNtQ
'60 KG Coupe - resto kinda started
01 New Beetle - gf's car, but I turn the spanners
