Skip to content
Aussieveedubbers

Past German Engineering!!

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

1500S Custom Title Time!

1,418 posts · joined Mar 2005 ·

#781950
One part of the Notch front brake setup which wasn't checked back around 2000 was the actual adjuster. The cylinders were totally cleaned, honed and new cups put in BUT!! Get a look at one of the adjusters when I went for a total strip down. No wonder one shoe was a bit dodgy to adjust. The hole in the nut is tapped way out of square. This is all original from 1964. A "poet's day" build!

Don't rely on the thoughts that VW did everything right regarding quality control back then!

DH

2 attachments · Log in to view

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#781960
THAT SEEMS INCREDIBLE DALLAS

Maybe Yours was a prototype??
hand made by a NON German.. lol

If they were making thousands of these at a time ....
are all the others the same????

or maybe a machine malfunction...??

I hope so....

LEE



- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#781964
German engineering or 45 years of use???
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

1500S Custom Title Time!

1,418 posts · joined Mar 2005 ·

#781966
A manufacturing mishap Matt. Nothing is bent, nothing is worn. The car has still only travelled around 38,000 miles since it rolled off the production line in 1964. Gone into the jig out of line and was drilled and tapped that way. Not unheard of even now. A few years back I had a 3/16" Whit die brand new and the thread in that was out of square about 5 degrees. Actually kept it as a sample for students to see how things can go wrong in production.

No joke Lee, I think this car was out in the paddock waiting for a few bits before it was painted OR the parcel shelf was stamped from a rusty piece of metal. The surface rust was beautifully trapped under the original paint! Other than that the car was one of the best rust free German S cars I've seen here......... but then again there were never many of them here to see!! I've only ever seen or heard of about a dozen in total in all these years.

DH

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#781968
Gotta say I'm not sure about that, if it was tapped incorrectly the hole in the adjuster would be a neat fit albeit misaligned, but you can see in the last pic, the adjuster screw can be true to the center, but has flogged the hole out of center.....I've seen that wear before, maybe from pad/shoe vibrations or something, certainly didn't get moved/adjusted for some time.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

1500S Custom Title Time!

1,418 posts · joined Mar 2005 ·

#781972
matberry wrote:Gotta say I'm not sure about that, if it was tapped incorrectly the hole in the adjuster would be a neat fit albeit misaligned, but you can see in the last pic, the adjuster screw can be true to the center, but has flogged the hole out of center.....I've seen that wear before, maybe from pad/shoe vibrations or something, certainly didn't get moved/adjusted for some time.
Just the way the pic was taken Matt. Remember I have the part sitting in front of me here on the desk! The screw is a nice neat fit in the nut with no sign of wear. If you look at the side view you can see how far off centre the hole is at the end which fits into the cylinder casting. Definitely a manufacturing fault which had fallen through the cracks!

DH

Phil74Camper Head in the Clouds

2,703 posts · joined Aug 2002 ·

#782424
Not German engineering - it's Australian. Those little parts were locally made for the Clayton factory in Melbourne. 1964-67 were the years of maximum Australian content - although Type 3s didn't quite have the same local content as Beetles.

Not sure who the local supplier of small parts like that could have been - Repco is one possibility.

1500S Custom Title Time!

1,418 posts · joined Mar 2005 ·

#782534
Phil74Camper wrote:Not German engineering - it's Australian. Those little parts were locally made for the Clayton factory in Melbourne. 1964-67 were the years of maximum Australian content - although Type 3s didn't quite have the same local content as Beetles.

Not sure who the local supplier of small parts like that could have been - Repco is one possibility.
No no Phil!! This one was never near any production line in Clayton or anywhere else in Australia. It is the fully imported German built 1500S of about April 1964 and that part, as well as the rest of the car except transmission was as it was off the assembly line. Just a bad day with a bit of swarf caught under the adjuster when it was drilled and tapped!

Do you think I'd own one of those lower quality OZ built 1500 S things!!😂

DH