Skip to content
Aussieveedubbers

2442 Beetle

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

airkewld Slammed & Awesome Dubber

81 posts · joined Jul 2007 ·

#798654
Hey guys just thought I would make a post (been a while) as I am excited after we finally had some better luck down the strip (2442 EFI). It was cold at WSID last night so the track wasnt super sticky however we managed to pull off a pb. Had 3 runs all 12.4s with a best mph of 113. Everything held together beautifully with the car running straight as an arrow. 60ft and 1/8th times were slow with most being 2 seconds for 60ft and 8 seconds plus for the 1/8th. So we may get that 11 second pass yet 🙂...

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#798685
Well done, 113mph is surely an 11. 🙂
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

reub VWRX is gone...

2,054 posts · joined Sep 2002 ·

#798689
Sweet!

What are the engine specs?
Reub

Keith Haeusler Seriously Crusin Dubber

168 posts · joined Sep 2002 ·

#798789
Airkewld,

awesome job mate, well done.

Regards, Keith.

alansvw Wolfsburg Wizard

426 posts · joined May 2005 ·

#798859
sounds great! got any photos or info on the car.
AL

airkewld Slammed & Awesome Dubber

81 posts · joined Jul 2007 ·

#798871
Thanks to you all for the positive feedback... Reub here are a few specs it runs - 94 mm wiseco pistons, 88 mm bugpack crank, pauter rockers, cb comp elim heads, engle cam and twin 50mm throttle bodies... We did the runs with the exhaust on ,air cleaners and street radials 🙂 . . . will post some pics for you guys soon

airkewld Slammed & Awesome Dubber

81 posts · joined Jul 2007 ·

#798932
Im not 100% sure on the compression but im fairly sure its around 11.5 : 1 and the cam is an Fk89.

hellbugged 48's and straight cuts

5,080 posts · joined Apr 2003 ·

#798934
200ish hp at the wheels!.......yeah haaaaaa

oldskl60 Officially Full-On Dubber

251 posts · joined Mar 2008 ·

#799018
Congrats on a successful outing! That makes for a damn tough streeter!!

Look forward to hearing/seeing more!

LOWBUG Insano Dub Head

738 posts · joined Jul 2003 ·

#799030
Are you taking it to Warick?

airkewld Slammed & Awesome Dubber

81 posts · joined Jul 2007 ·

#799167
Lowbug im not sure if we will be taking it to warwick yet due to other commitments.... OMclarke the wheels are weld..

airkewld Slammed & Awesome Dubber

81 posts · joined Jul 2007 ·

#799330
How much difference time wise do you guys think you could save by running a full slick compared to M & H racemaster dot's.

debiasi4 Officially Full-On Dubber

283 posts · joined Dec 2004 ·

#799332
on my green turbo beetle i had m&h rasemasters (235s) and it would 60ft in the 1.6 sec no problems (11.8 @ 115)i put on a 26x6 slick and it felt no different same 60
thanks adam

airkewld Slammed & Awesome Dubber

81 posts · joined Jul 2007 ·

#799336
thanks for that Adam ... We havnt been able to get the greatest grip off the line and have only been able to achieve 1.9 (best) or 2 second 60ft. The track was very cold and not very sticky which was probably the biggest factor... Its the first half of the track which needs dramatic improvements. We are running about 20psi is that too high... do you recommend less?

debiasi4 Officially Full-On Dubber

283 posts · joined Dec 2004 ·

#799360
20psi is alot higher than what i ran i normally set it at around 12psi and fined tuned it from there depending on grip on the day
adam

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#799375
I agree with all you've said Adam, 12=13 PSI starting point, M/T's every bit as good as a 6" slick for a n/a beetle.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

55slug Seriously Crusin Dubber

169 posts · joined Jul 2006 ·

#799807
Thats a really impressive mph, easy 11s for sure. I have run a 1.6 60ft on M and H dot legal 215s at 19 psi. Or on 205 radials 1.95s. Im in NZ and these runs were at night, so generally cold and not a highly prepped track. I did find getting some decent heat into the tyres made a big difference - 2nd gear burnouts and leaving the line at around 6k. Im running a 2442 as well so some similarities there I guess !

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 ·

#799873
What happen to this beetle at the drags tonight ? The run I saw was a 13.15, but it had heaps of smoke coming out of the engine bay........hope its all ok ??


airkewld Slammed & Awesome Dubber

81 posts · joined Jul 2007 ·

#799947
Hit the track again last night and made another pb of 12.32 with mph down a little at 109.64. On the last run the engine seemed to get a little hot and it was smoking quite heavily. Not sure of the damage yet but it was making a "ticking" sound after the run. We were able to drive it back to the pits so I dont think it will be anything too major. We lowered the psi in the tires to around 15 which made a difference with a best 60ft of 1.75... Hopefully now we can get those times to continually come down and get back the good mph of our first outing.

fat-attack Casual Dubber

38 posts · joined Jun 2010 ·

#800143
Some great times being posted!
Let me and OMclarke know when you and any of the other vw boys are heading out. We go out to watch now and then and always want some Bugs out there.
Good luck with the 11

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 ·

#800298
who is that driving ??


airkewld Slammed & Awesome Dubber

81 posts · joined Jul 2007 ·

#800345
My Dad Glen was driving

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 ·

#800356
hehe...i thought you must have aged heaps !!

I have footage of his last run, I was 2 cars behind in the lane queue so my GOPRO filmed it !